topic Re: how enable cpp in imxrt1064 in i.MX RT Crossover MCUs

how enable cpp in imxrt1064

steve22 — Mon, 31 May 2021 06:46:10 GMT

Hi all,

im new to embedded programming, and happen to be working with imxrt1064. I have a need to write cpp project files and compile. currently the project is in c, and i have a cmake file inside the project folder too. any idea what do i need to do to enable cpp? i saw a fsl_flexispi_nor_boot.c, but not sure how do i use it. Your input will be greatly appreciated, thank you!

Re: how enable cpp in imxrt1064

jeremyzhou — Mon, 31 May 2021 08:36:14 GMT

Hi,

Thank you for your interest in NXP Semiconductor products and for the opportunity to serve you.
To provide the fastest possible support, I'd highly recommend you refer to the post to create a C++ project demo.
Have a great day,
TIC

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

Re: how enable cpp in imxrt1064

steve22 — Mon, 07 Jun 2021 12:34:17 GMT

Hi Jeremy,

the issue has been resolved. thank you. (: