i.MX RT Crossover MCUsのトピックRe: MIMXRT1060-EVK: Bootloader Mode

MIMXRT1060-EVK: Bootloader Mode

matthiasroedder — Thu, 17 Dec 2020 14:26:59 GMT

Hello Everyone,

I'm using the MIMXRT 1060 Evaluation Kit and I'm trying to start the Board in Bootloader Mode. I know this might seem stupid to ask but: How can I do this?

I tried keeping reset button pressed, while connecting the USB cable to the SDA USB port, but this does not work.

Happy Holidays!

Thank you in advance.

Best regards, Matthias.

Re: MIMXRT1060-EVK: Bootloader Mode

mjbcswitzerland — Thu, 17 Dec 2020 19:00:38 GMT

Hi

See page 14 of https://www.utasker.com/docs/iMX/uTaskerV1.4_iMX.pdf
i.MX RT 10160 board has its dip swithes on the top of the board though.

Regards

Mark

Re: MIMXRT1060-EVK: Bootloader Mode

jeremyzhou — Fri, 18 Dec 2020 02:12:55 GMT

Hi,
Thank you for your interest in NXP Semiconductor products and for the opportunity to serve you.
I've attached a document that demonstrates how to force the i.MX RT1060 enter the Serial Downloader mode, please refer to it for details.

Have a great day,
TIC

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

Re: MIMXRT1060-EVK: Bootloader Mode

matthiasroedder — Mon, 04 Jan 2021 13:30:27 GMT

Hey,

thank you for your Reply. Where can I find the attached document? Sorry I'm new here

Happy New Year!

Matthias

Re: MIMXRT1060-EVK: Bootloader Mode

matthiasroedder — Mon, 04 Jan 2021 19:10:40 GMT

Hi,

thank you for the tips! I have tried this, but I always have the same error "Cannot find USB-HID device (vid=0x1FC9, pid=0x0135, please connect USB cable to your board first!"

The board ist connected to my PC and the Boot Mode Switches configurated as described in the document.

Happy New Year!

Matthias

Re: MIMXRT1060-EVK: Bootloader Mode

mjbcswitzerland — Mon, 04 Jan 2021 19:41:27 GMT

Have you connected the USB cable?

It is not the one that is used to power the board. You also need to connect a second one to the processor's USB device socket.

Regards

Mark
[uTasker project developer for Kinetis and i.MX RT]
Contact me by personal message or on the uTasker web site to discuss professional training, solutions to problems or rapid product development requirements

For professionals searching for faster, problem-free Kinetis and i.MX RT 10xx developments the uTasker project holds the key: https://www.utasker.com/iMX/RT1060.html

Re: MIMXRT1060-EVK: Bootloader Mode

matthiasroedder — Tue, 05 Jan 2021 12:05:27 GMT

I have connected the USB cable to the Debug USB on the Board. Do I have to use the "USB Host" or the "USB OTG" additionally?

I attached a picture of the Board to make clear what I mean.

Thank You!

Matthias

Re: MIMXRT1060-EVK: Bootloader Mode

matthiasroedder — Tue, 05 Jan 2021 12:31:46 GMT

Okay yeah I have to connect the Debug USB and the USB OTG to my PC and then it works!

Thank you @mjbcswitzerland !

Regards

Matthias