RT1011 Flashloader

nxf58843 — Tue, 17 Nov 2020 22:40:48 GMT

When using the flashloader as described in AN12238 with RT1011, replace the commands on pages 11 and 12 with these:

>sdphost.exe -u 0x1fc9,0x0145 -- error-status

>sdphost.exe -u 0x1fc9,0x0145 -- write-file 0x20205800 "..\..\Mfgtools-rel\Profiles\MXRT101X\OS Firmware\ivt_flashloader.bin"

>sdphost.exe -u 0x1fc9,0x0145 --jump-address 0x20205800

Re: RT1011 Flashloader

kerryzhou — Wed, 18 Nov 2020 06:29:45 GMT

Dear colleague, do you want to share the experience, or have any question about the rt1010 flashloader?

In fact, about the sdphost related commander for RT1010, I highly recommend you use the MCUBootutility, that will list all the related log.

Wish it helps you!

If you still have questions about it, please kindly let me know!

Best Regards,

Kerry

-------------------------------------------------------------------------------

Note:

- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored

Please open a new thread and refer to the closed one, if you have a related question at a later point in time.

-----------------------------------------------------------------------------