IMX8QXP will not flash new image

lrd_qa — Wed, 24 Mar 2021 13:48:08 GMT

I recently flashed an Andriod10 image to my IMX8QXP-mek board. The image works fine but when I try to flash a new image I get the following:

./uuu_imx_android_flash.sh -f imx8qxp

dtbo is supported

dual slot is supported

dynamic parttition is supported

generate lines to flash u-boot-imx8qxp.imx to the partition of bootloader0

generate lines to flash partition-table.img to the partition of gpt

generate lines to flash dtbo-imx8qxp.img to the partition of dtbo_a

generate lines to flash boot.img to the partition of boot_a

generate lines to flash vbmeta-imx8qxp.img to the partition of vbmeta_a

generate lines to flash dtbo-imx8qxp.img to the partition of dtbo_b

generate lines to flash boot.img to the partition of boot_b

generate lines to flash vbmeta-imx8qxp.img to the partition of vbmeta_b

Invalid sparse file format at header

Invalid input image file.

The board will allow me to flash the same image over and over but nothing new. Tried to erase userdata using fastboot but still could not re-flash board.

Re: IMX8QXP will not flash new image

lrd_qa — Wed, 24 Mar 2021 20:49:30 GMT

Problem solved. When I extracted the downloaded image files, the files were empty which obviously failed to flash onto my board.

topic Re: IMX8QXP will not flash new image in i.MX Solutions

IMX8QXP will not flash new image

Re: IMX8QXP will not flash new image