i.MX 6Solox M4 programming using Uboot for udoo board

armk — Tue, 04 Apr 2017 05:38:48 GMT

Hi,

I am using i.MX 6solox on udoo board. On A9 i have linux running successfully. I want to program the M4 using u boot , there is no QSPI on the board. I am noob in Linux. I understand that the U-boot is made custom to hardware layout. In this case I wont be able to use the U-boot provided by the freescale?. Can anyone help me to start this?

Thank You

Re: i.MX 6Solox M4 programming using Uboot for udoo board

Yuri — Tue, 04 Apr 2017 06:14:53 GMT

Hello,

Please use the following :

“Loading Code on Cortex-M4 from Linux for the i.MX 6SoloX and i.MX 7Dual/7Solo Application Processors”

http://www.nxp.com/assets/documents/data/en/application-notes/AN5317.pdf

MX6 SoloX bare metal startup

Have a great day,

Yuri

------------------------------------------------------------------------------

Note: If this post answers your question, please click the Correct Answer button. Thank you!

i.MX Processorsのトピックi.MX 6Solox M4 programming using Uboot for udoo board

i.MX 6Solox M4 programming using Uboot for udoo board

Re: i.MX 6Solox M4 programming using Uboot for udoo board