i.MX ProcessorsのトピックRe: iMX6 solo problem

iMX6 solo problem

wanglee — Mon, 26 Dec 2016 09:11:23 GMT

My mfgtools support iMX6Q/iMX6D, it works right. but it didn't support my iMX6 solo. when the power on, "No Device Connected". I don't think this is a hardware problem. what should I DO? CHANGE the settings of mfgtool ?

Re: iMX6 solo problem

Yuri — Mon, 26 Dec 2016 09:36:43 GMT

Hello,

Please try using the recent MFG

http://www.nxp.com/webapp/Download?colCode=IMX6_L4-1-15_2-0-0_MFG-TOOL&appType=license&location=null&Parent_nodeId=13376…

Also, please check if the i.MX6 S board is configured for serial (USB) boot mode ;

BOOT_MODE[1:0] = 01 (Serial Downloader).

Have a great day,

Yuri

------------------------------------------------------------------------------

Note: If this post answers your question, please click the Correct Answer

button. Thank you!

Re: iMX6 solo problem

wanglee — Wed, 28 Dec 2016 01:47:15 GMT

The recent MFG， it works. thanks.

Re: iMX6 solo problem

wanglee — Fri, 30 Dec 2016 08:06:13 GMT

NOW ,the new tool (mfgtools-without-rootfs) can find my iMX6Q . when power on ,it shows HID-compliant device. then START, it always get stuck in here what is the problem?