topic Re: does any tool like mfgtools can run on linux host in i.MX Processors

does any tool like mfgtools can run on linux host

caibai — Sat, 11 Mar 2017 01:32:25 GMT

hi,i just install linux OS on my computer and lazy to install windows,does any tool can down load image to my i.MX6UL board on linux?

Re: does any tool like mfgtools can run on linux host

Rita_Wang — Sat, 11 Mar 2017 06:59:19 GMT

Hi,

In our website only the mfgtool supplied for downlaodiing the images to the board. So sorry. So you need to copy your images to windows then download images to your board and then boot. Or you can only download the uboot image to your board and then boot up kernel and rootfs from NFS, hope this can help you.
Have a great day,
Rita

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: does any tool like mfgtools can run on linux host

caibai — Mon, 13 Mar 2017 01:51:06 GMT

OK，thank you for reply。

Re: does any tool like mfgtools can run on linux host

Rita_Wang — Mon, 13 Mar 2017 02:32:38 GMT

Hi,

It's my pleasure. If you have new questions you can create new threads in our community.

Have a nice day

Rita

Re: does any tool like mfgtools can run on linux host

andrewdyer — Mon, 13 Mar 2017 15:08:31 GMT

https://community.nxp.com/docs/DOC-94117

might help you. It doesn't have all the stuff that mfgtool does. It pretty much executes DCD files to set up registers and loads binaries, no gui, no xml config files (yay!).

Re: does any tool like mfgtools can run on linux host

caibai — Tue, 14 Mar 2017 01:02:47 GMT

that is what i want,thank you very much.