topic Burn eFuses using MFG Tool in i.MX Processors https://community.nxp.com/t5/i-MX-Processors/Burn-eFuses-using-MFG-Tool/m-p/630375#M95722 <HTML><HEAD></HEAD><BODY><P>Where in the ucl2.xml document do I include the commands to burn the eFuses required to boot an image from an SD card? My best guess is after jumping to the OS image. Is this correct?</P></BODY></HTML> Mon, 19 Sep 2016 16:00:16 GMT aliismail 2016-09-19T16:00:16Z Burn eFuses using MFG Tool https://community.nxp.com/t5/i-MX-Processors/Burn-eFuses-using-MFG-Tool/m-p/630375#M95722 <HTML><HEAD></HEAD><BODY><P>Where in the ucl2.xml document do I include the commands to burn the eFuses required to boot an image from an SD card? My best guess is after jumping to the OS image. Is this correct?</P></BODY></HTML> Mon, 19 Sep 2016 16:00:16 GMT https://community.nxp.com/t5/i-MX-Processors/Burn-eFuses-using-MFG-Tool/m-p/630375#M95722 aliismail 2016-09-19T16:00:16Z Re: Burn eFuses using MFG Tool https://community.nxp.com/t5/i-MX-Processors/Burn-eFuses-using-MFG-Tool/m-p/630376#M95723 <HTML><HEAD></HEAD><BODY><P>Hi Ali,</P><P></P><P>please take a look to the following thread.</P><P><A href="https://community.nxp.com/thread/316232">Flashing fuses on custom imx6 board</A>&nbsp;</P><P></P><P></P><P><BR />Regads,<BR />Carlos</P><P></P><P>-----------------------------------------------------------------------------------------------------------------------<BR />Note: If this post answers your question, please click the Correct Answer button. Thank you!<BR />-----------------------------------------------------------------------------------------------------------------------</P></BODY></HTML> Mon, 19 Sep 2016 17:28:08 GMT https://community.nxp.com/t5/i-MX-Processors/Burn-eFuses-using-MFG-Tool/m-p/630376#M95723 Carlos_Musich 2016-09-19T17:28:08Z