Imx6 power on sequencing

vvjay — Tue, 20 Dec 2016 10:20:23 GMT

Hi,

In <i.MX Hardware Design Guide and Board Bring up> page31, it says Power on sequencing: VDD_SNVS_IN<=VDD_HIGH_IN<=any other power supply, but in <SPF-27516.pdf> page 19, MMPF0100F power on sequencing doesn't meet the requirement. VDD_HIGH_IN is the 11th. Does it matter? And if VDD_SNVS_IN is not the first power on, will the board not bring up?

Wenjie

Re: Imx6 power on sequencing

igorpadykov — Tue, 20 Dec 2016 10:48:34 GMT

Hi Wenjie

recommended to follow power-up sequence defined in Datasheet for

each processor, as it is most last to date and frequently updated document.

SPF-27516 was designed on early processor development and may have inaccuracies.

Yes sequence VDD_SNVS_IN<=VDD_HIGH_IN .. is important for successful boot.

Best regards
igor
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

i.MX Processors中的主题 Imx6 power on sequencing

Imx6 power on sequencing

Re: Imx6 power on sequencing