i.MX ProcessorsのトピックRe: Using MFG TOOLS with i.MX6SXSD，something wrong with it

Using MFG TOOLS with i.MX6SXSD，something wrong with it

bowenzhang — Wed, 19 Apr 2017 08:08:08 GMT

log:

Allocating group tables: done
Writing inode tables: done
Creating journal (4096 blocks): done
Writing superblocks and filesystem accounting information: done

UTP: sending Success to kernel for command $ mkfs.ext4 /dev/mmcblk3p6.
utp_poll: pass returned.
UTP: received command '$ mkfs.ext4 /dev/mmcblk3p7'
UTP: executing "mkfs.ext4 /dev/mmcblk3p7"
mke2fs 1.42.9 (28-Dec-2013)
Filesystem label=
OS type: Linux
Block size=1024 (log=0)
Fragment size=1024 (log=0)
Stride=0 blocks, Stripe width=0 blocks
2048 inodes, 8192 blocks
409 blocks (4.99%) reserved for the super user
First data block=1
Maximum filesystem blocks=8388608
1 block group
8192 blocks per group, 8192 fragments per group
2048 inodes per group

Allocating group tables: done
Writing inode tables: done
Creating journal (1024 blocks): done
Writing superblocks and filesystem accounting information: done

UTP: sending Success to kernel for command $ mkfs.ext4 /dev/mmcblk3p7.
utp_poll: pass returned.
UTP: received command '$ mount -o remount,size=600M rootfs /'
UTP: executing "mount -o remount,size=600M rootfs /"
UTP: sending Success to kernel for command $ mount -o remount,size=600M rootfs /.
utp_poll: pass returned.
UTP: received command 'send'
UTP: sending Success to kernel for command send.
UTP: received command '$ simg2img $FILE /dev/mmcblk3p5'
UTP: executing "simg2img $FILE /dev/mmcblk3p5"
Failed to read sparse file
UTP: sending Non-success to kernel for command $ simg2img $FILE /dev/mmcblk3p5.
utp_poll: exit with status 65280

Re: Using MFG TOOLS with i.MX6SXSD，something wrong with it

bowenzhang — Thu, 20 Apr 2017 00:59:03 GMT

I have changed serval sd card,but nothing changed.

Re: Using MFG TOOLS with i.MX6SXSD，something wrong with it

joanxie — Thu, 20 Apr 2017 08:18:44 GMT

could you tell me the steps? let's reproduce this, did you use demo image or cusomized image? pls share your test steps.

Re: Using MFG TOOLS with i.MX6SXSD，something wrong with it

bowenzhang — Mon, 24 Apr 2017 01:15:56 GMT

I used demo image.Now,I have make it.because mfg's version is wrong.thx

Re: Using MFG TOOLS with i.MX6SXSD，something wrong with it

brunochen — Tue, 12 Sep 2017 03:15:12 GMT

Hi,

I have the same problem.

How do you know you use the wrong mfg version?

BTW, could you share how to find the correct mfg tool?

Thanks,

Bruno

Re: Using MFG TOOLS with i.MX6SXSD，something wrong with it

bowenzhang — Tue, 12 Sep 2017 06:05:43 GMT

you can see the filename

Re: Using MFG TOOLS with i.MX6SXSD，something wrong with it

brunochen — Tue, 12 Sep 2017 06:36:53 GMT

Hi,

Got it. Many thanks!!!