Programming ZMK on i.MX6

hughboddington — Thu, 09 Feb 2017 14:50:05 GMT

I'm trying to program the ZMK on the i.MX6 but just can't get it to work. I must be missing something simple.

- The system is secure booting in "closed" mode.

- hab_status reports no errors in u-boot

- SSM_ST of SNVS_HPSR is 1101 - "trusted"

- ZMK_WSL and ZMK_RSL of SNVS_HPLS are not set (ZMK is writeable and readable)

- ZMK_RHL and ZMK_WHL of SNVS_LPLR are not set

- ZMK_ZERO is true

- ZMK_HWP of SNVS_LPMKCR is false (software programming mode)

- The processor is executing in Supervisor mode

- I write a test pattern to the ZMK registers (0x20CC06C - 0x20CC08C) using 32-bit writes

- When I read back, I get 0x00, and ZMK_ZERO is still true

Re: Programming ZMK on i.MX6

Yuri — Wed, 15 Feb 2017 07:56:49 GMT

Hello,

Sorry, but the information you are requesting is treated as confidential info at this time and requires a signed NDA (Non-Disclosure Agreement). Naturally, we cannot discuss this with you in public anyway, this requires to be handled

as a Service Request.

Have a great day,

Yuri

------------------------------------------------------------------------------

Note: If this post answers your question, please click the Correct Answer

button. Thank you!

topic Re: Programming ZMK on i.MX6 in i.MX Processors

Programming ZMK on i.MX6

Re: Programming ZMK on i.MX6