Cable for Bluetooth Connection

bipulpandey — Thu, 24 Nov 2016 12:22:45 GMT

HI All,

I am Using I.mx6 Series SABRE For Smart Device (MCIMX6DL-SDP)

I want to Use Bluetooth (I am having silex module that is fit into SDIO PORT)

I am not able to find the FFC cable for Bluetooth (That is connected to J13)

Please suggest From which place I will get that cable that can work for this purpose

Thanks

Bipul Pandey

Re: Cable for Bluetooth Connection

igorpadykov — Thu, 24 Nov 2016 23:42:57 GMT

Hi Bipul

seems this is selfmade cable (one can buy it on online stores, use BOM

in design documentation), please check how it is used on

How to enable BT on board imx6q_sabresd RevC.

Schematics (1)
"Design files, including hardware schematics, Gerbers, and OrCAD files. (REV C5) "
http://www.nxp.com/products/software-and-tools/hardware-development-tools/sabre-development-system/sabre-platform-for-smart-devices-based-on-the-i.mx-6-series:RDIMX6SABREPLAT?fpsp=1&tab=Design_Tools_Tab

Best regards
igor
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

i.MX ProcessorsのトピックRe: Cable for Bluetooth Connection

Cable for Bluetooth Connection

Re: Cable for Bluetooth Connection