i.MX Processors中的主题 Re: How to write Boot_Mode[1:0] register to select internal boot

How to write Boot_Mode[1:0] register to select internal boot

adityanagal — Mon, 27 Mar 2017 13:05:57 GMT

Hi ,

I am working over IMX6 solo processor , as per reference manual Boot_mode[1:0] should be written 0b10 to select the internal boot. So how to write to write the Boot_Mode[1:0] bits , so processors boot up with Internal boot . Thanks!

Regards,

Aditya Nagal

Re: How to write Boot_Mode[1:0] register to select internal boot

diegoadrian — Fri, 31 Mar 2017 18:18:20 GMT

Hello Aditya,

Thank you for writing.

If you want to configure the Boot_Mode[1:0] register, the register needs to be written by J-tag.

I hope this can solve your question.

Best Regards,

Diego.

Re: How to write Boot_Mode[1:0] register to select internal boot

jan_spurek — Mon, 03 Apr 2017 06:53:49 GMT

Hello Aditya,

as an alternative, you can also set the Boot Mode register by adding pull up and pull down resistors or switches (as it is on our reference boards) to BOOT_MODE0 and BOOT_MODE1 pins.

Berst Regards,

Jan

Re: How to write Boot_Mode[1:0] register to select internal boot

adityanagal — Tue, 04 Apr 2017 10:00:59 GMT

Thanks a lot!!