topic Re: imx6 can not load bootloader in i.MX Processors

imx6 can not load bootloader

linhsun — Fri, 16 Dec 2016 05:46:50 GMT

Dear all

My board is i.MX6 SABRE MCIMX6Q-SDB, I use mfgtool download image, after (power on) can not load u-boot(uart not see message), I have change SW6 (jump) to sdcard(0100 0010) or emmc(1101 0110) boot mode, but always into download mode, please help me, thank

Re: imx6 can not load bootloader

Yuri — Fri, 16 Dec 2016 07:10:53 GMT

Hello

Please try using the SD card demo image (it has .sdcard file extension).

i.MX 6 Series Software and Development Tool|NXP

You may apply Win32DiskImager to copy the image to SD card

under Windows host.

https://sourceforge.net/projects/win32diskimager/

Have a great day,
Yuri

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!

Re: imx6 can not load bootloader

linhsun — Fri, 16 Dec 2016 09:41:05 GMT

Dear Yuri Muhin

I have try your suggest, always into download mode, should is not sdcard question , because (SW6) jump setting to any mode, result can not into u-boot(can see HID devices on windows ), thank very much.

Re: imx6 can not load bootloader

Yuri — Mon, 19 Dec 2016 03:48:46 GMT

Have You tried both SD slots : SD2 and SD3 ?

~Yuri.

Re: imx6 can not load bootloader

linhsun — Mon, 19 Dec 2016 06:45:00 GMT

Dear Yuri

Yes, I have(plug in SD, setting SW3 to 1000 0010 and 0100 0010), but always into download mode, thank your help.

Re: imx6 can not load bootloader

Yuri — Mon, 19 Dec 2016 07:06:15 GMT

Re: imx6 can not load bootloader

linhsun — Tue, 20 Dec 2016 01:13:45 GMT

Dear Yuri

Thank you very much. found problem!! I unintentional setting fuse (boot mode is change), can I read fuse status via command or tool?

Re: imx6 can not load bootloader

Yuri — Wed, 21 Dec 2016 07:31:19 GMT

Hello,

Good starting point is to read IMX6 RM (fusemap, system boot, and

on-chip OTP Controller) and AN4581 (Secure Boot on i.MX50, i.MX53, and i.MX 6
Series using HABv4)

https://cache.freescale.com/files/32bit/doc/app_note/AN4581.pdf

then you can use command ‘fuse’ of u-boot.

Also, after Linux kernel boot /sys/fsl_opt may be used to review the fuses.

Regards,

Yuri.

Re: imx6 can not load bootloader

linhsun — Wed, 21 Dec 2016 10:41:07 GMT

Thank you help, this helpful.