topic iMX6 Boot message console in i.MX Processors https://community.nxp.com/t5/i-MX-Processors/iMX6-Boot-message-console/m-p/612471#M92471 <HTML><HEAD></HEAD><BODY><P>For MCIMX6G3CVM05AA can I configure UART3 for boot messages/console? Is it restricted to UART1 &amp; UART2?</P></BODY></HTML> Thu, 12 Jan 2017 21:12:22 GMT nikhilghode 2017-01-12T21:12:22Z iMX6 Boot message console https://community.nxp.com/t5/i-MX-Processors/iMX6-Boot-message-console/m-p/612471#M92471 <HTML><HEAD></HEAD><BODY><P>For MCIMX6G3CVM05AA can I configure UART3 for boot messages/console? Is it restricted to UART1 &amp; UART2?</P></BODY></HTML> Thu, 12 Jan 2017 21:12:22 GMT https://community.nxp.com/t5/i-MX-Processors/iMX6-Boot-message-console/m-p/612471#M92471 nikhilghode 2017-01-12T21:12:22Z Re: iMX6 Boot message console https://community.nxp.com/t5/i-MX-Processors/iMX6-Boot-message-console/m-p/612472#M92472 <HTML><HEAD></HEAD><BODY><P>Hi nikhilghode&nbsp;</P><P></P><P>please check example with sabre ai uart configuration remapping console on uart4</P><P>uboot/inlcude/configs/mx6qsabreauto.h</P><P><A class="link-titled" href="http://git.freescale.com/git/cgit.cgi/imx/uboot-imx.git/tree/include/configs/mx6qsabreauto.h?h=imx_v2016.03_4.1.15_2.0.0_ga" title="http://git.freescale.com/git/cgit.cgi/imx/uboot-imx.git/tree/include/configs/mx6qsabreauto.h?h=imx_v2016.03_4.1.15_2.0.0_ga">uboot-imx.git - Freescale i.MX u-boot Tree</A>&nbsp;</P><P></P><P>Best regards<BR />igor<BR />-----------------------------------------------------------------------------------------------------------------------<BR />Note: If this post answers your question, please click the Correct Answer button. Thank you!<BR />-----------------------------------------------------------------------------------------------------------------------</P></BODY></HTML> Sat, 28 Jan 2017 02:59:54 GMT https://community.nxp.com/t5/i-MX-Processors/iMX6-Boot-message-console/m-p/612472#M92472 igorpadykov 2017-01-28T02:59:54Z