i.MX ProcessorsのトピックRe: Serial Downloader USB HID serial number

Serial Downloader USB HID serial number

MA1979 — Mon, 21 Nov 2016 10:14:44 GMT

Hi together,

we are using serial downloader in an i.MX7 device. When i look at the USB HID descriptor the serial number string is empty. Is there any way to get a serial number in serial downloader so that we can find the correct device if more than one is connected to the host?

Regards Mario

Re: Serial Downloader USB HID serial number

RossMcLuckie — Mon, 21 Nov 2016 18:55:57 GMT

Not 100% sure on this, but I assume you mean a way to program a USB PID and VID code?

If so then there are areas in the fuse map assigned for this, see the reference manual -

These are intended for customer use, what I'm not sure about is if there is a direct link between these fuse values and the serial loader mode, but I think it is likely, you can try programming a test value to see if it works as required, but for production I think you would need to be using registered VID and PID codes with the usb.org.

Regards

Ross

Re: Serial Downloader USB HID serial number

Yuri — Tue, 22 Nov 2016 02:57:23 GMT

Hello,

Parameters, provided by i.MX7 boot ROM for USB boot loader, may be
found in section 6.6.9.1 (USB) of the i.MX7 Reference Manual.

In Your case, perhaps the following helps, but this is OS dependent.

HidD_GetSerialNumberString routine (Windows Drivers)

Have a great day,

Yuri

------------------------------------------------------------------------------

Note: If this post answers your question, please click the Correct
Answer button. Thank you!

------------------------------------------------------------------------------

Re: Serial Downloader USB HID serial number

MA1979 — Mon, 28 Nov 2016 12:37:30 GMT

Hi,

i don't want to programm VID or PID. I would like to porgramm a serial number which can be read by a function such as HidD_GetSerialNumberString routine (Windows Drivers). Currently the answer is empty on every device.

Regards Mario

Re: Serial Downloader USB HID serial number

Yuri — Fri, 02 Dec 2016 04:09:41 GMT

Hello,

Boot ROM cannot be changed (programmed).

Perhaps, it makes sense to use USB addresses, which

are assigned during enumeration.

Regards,

Yuri.