i.MX ProcessorsのトピックHow to realize MX53 Linux TVE output function? https://community.nxp.com/t5/i-MX-Processors/How-to-realize-MX53-Linux-TVE-output-function/m-p/188400#M9143 <HTML><HEAD></HEAD><BODY><P>Hi all,</P><P>&nbsp;</P><P>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; We are working with MX535 Linux platform, our cutomer request MX53 TVE output function, and we are trying many times and failed, could anyone has successful experience and give some advices? thanks.</P><P>&nbsp;</P><P>Jack</P></BODY></HTML> Sat, 19 Nov 2011 06:35:52 GMT Oceanblue 2011-11-19T06:35:52Z How to realize MX53 Linux TVE output function? https://community.nxp.com/t5/i-MX-Processors/How-to-realize-MX53-Linux-TVE-output-function/m-p/188400#M9143 <HTML><HEAD></HEAD><BODY><P>Hi all,</P><P>&nbsp;</P><P>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; We are working with MX535 Linux platform, our cutomer request MX53 TVE output function, and we are trying many times and failed, could anyone has successful experience and give some advices? thanks.</P><P>&nbsp;</P><P>Jack</P></BODY></HTML> Sat, 19 Nov 2011 06:35:52 GMT https://community.nxp.com/t5/i-MX-Processors/How-to-realize-MX53-Linux-TVE-output-function/m-p/188400#M9143 Oceanblue 2011-11-19T06:35:52Z Re: How to realize MX53 Linux TVE output function? https://community.nxp.com/t5/i-MX-Processors/How-to-realize-MX53-Linux-TVE-output-function/m-p/188401#M9144 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P>Please refer Table 73-3 in reference manual. There is no additional hardware required excet some termination and filters. You need to change the only operating mode and you can use the single channel of VGA connector as reference circuit 75ohm driving capability.</P><P>&nbsp;</P><P>Best Regards</P><P>Nitin Sonar</P></BODY></HTML> Fri, 22 Jun 2012 09:55:24 GMT https://community.nxp.com/t5/i-MX-Processors/How-to-realize-MX53-Linux-TVE-output-function/m-p/188401#M9144 NitinSonar 2012-06-22T09:55:24Z