https://community.nxp.com/t5/i-MX-Processors/usb-gedate-otg/m-p/605154#M91198 <HTML><HEAD></HEAD><BODY><P>Hi</P><P></P><P>please refer to sect.34.3.3 WakeUp Events Supported by USB</P><P>attached Linux Manual.</P><P></P><P>Best regards<BR />igor<BR />-----------------------------------------------------------------------------------------------------------------------<BR />Note: If this post answers your question, please click the Correct Answer button. Thank you!<BR />-----------------------------------------------------------------------------------------------------------------------</P></BODY></HTML> Tue, 13 Dec 2016 02:55:43 GMT igorpadykov 2016-12-13T02:55:43Z https://community.nxp.com/t5/i-MX-Processors/usb-gedate-otg/m-p/605153#M91197 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P>&nbsp;&nbsp;&nbsp;I am working no mx6q,using linux kernel 3.0.35. When i&nbsp;pull out usb, it display "fsl_gadget_disconnect_event: udc enter low power mode" . When i plug in usb, it display "otg udc vbus rising wakeup" and "try_wake_up_udc: udc out low power mode" . How can i solve this problem ?</P></BODY></HTML> Tue, 13 Dec 2016 01:07:41 GMT https://community.nxp.com/t5/i-MX-Processors/usb-gedate-otg/m-p/605153#M91197 linhaiboyy 2016-12-13T01:07:41Z https://community.nxp.com/t5/i-MX-Processors/usb-gedate-otg/m-p/605154#M91198 <HTML><HEAD></HEAD><BODY><P>Hi</P><P></P><P>please refer to sect.34.3.3 WakeUp Events Supported by USB</P><P>attached Linux Manual.</P><P></P><P>Best regards<BR />igor<BR />-----------------------------------------------------------------------------------------------------------------------<BR />Note: If this post answers your question, please click the Correct Answer button. Thank you!<BR />-----------------------------------------------------------------------------------------------------------------------</P></BODY></HTML> Tue, 13 Dec 2016 02:55:43 GMT https://community.nxp.com/t5/i-MX-Processors/usb-gedate-otg/m-p/605154#M91198 igorpadykov 2016-12-13T02:55:43Z