topic Re: Yocto i.MX6 Linux Kernel git clone fail in i.MX Processors

Yocto i.MX6 Linux Kernel git clone fail

frk — Wed, 12 Apr 2017 12:34:49 GMT

Hello all,

I'm trying to build i.MX6 fsl-image-qt5 image and Yocto always fail during the fetch step.

Git repository seems to be unreachable.

The yocto output :

WARNING: linux-imx-4.1.15-r0 do_fetch: Failed to fetch URL git://git.freescale.com/imx/linux-imx.git;protocol=git;branch=imx_4.1.15_2.0.0_ga, attempting MIRRO RS if available
ERROR: linux-imx-4.1.15-r0 do_fetch: Fetcher failure: Fetch command failed with exit code 128, output:
Cloning into bare repository '/home/bsp-imx6/fsl-release-bsp/downloads//git2/git.freescale.com.imx.linux-imx.git'...
fatal: read error: Connection reset by peer
fatal: early EOF
fatal: index-pack failed

ERROR: linux-imx-4.1.15-r0 do_fetch: Function failed: Fetcher failure for URL: 'git://git.freescale.com/imx/linux-imx.git;protocol=git;branch=imx_4.1.15_2.0.0 _ga'. Unable to fetch URL from any source.
ERROR: Logfile of failure stored in: /home/bsp-imx6/fsl-release-bsp/build-fb/tmp/work/imx6dlsabresd-poky-linux-gnueabi/linux-imx/4.1.15-r0/temp/log.do_fetch.2 9470
ERROR: Task 50 (/home/bsp-imx6/fsl-release-bsp/sources/meta-fsl-bsp-release/imx/meta-bsp/recipes-kernel/linux/linux-imx_4.1.15.bb, do_fetch) failed with exit code '1'
NOTE: Tasks Summary: Attempted 5632 tasks of which 3965 didn't need to be rerun and 1 failed.
No currently running tasks (5632 of 5838)

Summary: 1 task failed:
/home/bsp-imx6/fsl-release-bsp/sources/meta-fsl-bsp-release/imx/meta-bsp/recipes-kernel/linux/linux-imx_4.1.15.bb, do_fetch

Is there any other git repository available?

Best regards

Re: Yocto i.MX6 Linux Kernel git clone fail

gusarambula — Wed, 12 Apr 2017 21:07:58 GMT

Hello Kwiatkowski Frederic,

I’ve seen some people having problems with the git repositories lately buy always intermittently. Have you tried baking again?

I tested the 4.1.15 BSP and it seems it’s working fine right now. Please test it again. You may want to force fetch the source code first and then bake the image later to make sure the source code is downloaded before the building process.

$ bitbake <image_or_recipe> -c fetchall

I hope this helps!

Regards,

Re: Yocto i.MX6 Linux Kernel git clone fail

frk — Thu, 13 Apr 2017 07:42:12 GMT

Thanks for your support gusarambula.

fetchall fails with git.freescale.com

I'll try later if git repositories works intermittenlty.

I'll keep you in touch.

Best regards,

Re: Yocto i.MX6 Linux Kernel git clone fail

frk — Fri, 14 Apr 2017 07:08:42 GMT

Hi,

Just tried to git clone the repository and it fails à 63%.

Seems that freescale git server no to be reliable :smileysad:

Re: Yocto i.MX6 Linux Kernel git clone fail

gusarambula — Wed, 19 Apr 2017 20:47:01 GMT

Hello Frederic,

Would you please share with me the commands you're using? I'd like to try to reproduce this error as the 4.1.15 BSP seems to be working correctly.

I'm testing with:

$ cd fsl-release-bsp
$ repo init -u git://git.freescale.com/imx/fsl-arm-yocto-bsp.git -b imx-4.1.15-1.0.0_ga
$ repo sync

Regards,

Re: Yocto i.MX6 Linux Kernel git clone fail

shrikant_bobade — Thu, 20 Apr 2017 07:28:58 GMT

Hi,

I am also facing similar fetch failure for GA release 4.1.15_2.0.0: kernel

I have tried multiple times bitbaking but no luck so far. any pointers will be a great help.

ERROR: linux-imx-4.1.15-r0 do_fetch: Fetcher failure for URL: 'git://git.freescale.com/imx/linux-imx.git;branch=imx_4.1.15_2.0.0_ga'. Unable to fetch URL from any source.
ERROR: linux-imx-4.1.15-r0 do_fetch: Function failed: base_do_fetch

Thanks

Shrikant

Re: Yocto i.MX6 Linux Kernel git clone fail

frk — Thu, 20 Apr 2017 07:52:39 GMT

Hi,

the repo sync step worked when i've tried it but not the "bitbake fetchall fsl-image-qt5".

I've tried several time "git clone git://git.freescale.com/imx/linux-imx.git" without any succes.

The connection ends before the data transfer is finished.

The solution i've found was to copy the linux-imx download i've done several weeks ago on my new computer even if i would have prefered to use a clean fetch from the Internet

Re: Yocto i.MX6 Linux Kernel git clone fail

gusarambula — Mon, 24 Apr 2017 23:31:16 GMT

jorgeplascencia, would you know if there are problems with the repositories?

Regards,

Re: Yocto i.MX6 Linux Kernel git clone fail

jdepedro — Thu, 04 May 2017 11:54:17 GMT

I have also been experiencing problems trying to clone the kernel repository:

WARNING: linux-imx-4.1.15-r0 do_fetch: Failed to fetch URL git://git.freescale.com/imx/linux-imx.git;protocol=git;branch=imx_4.1.15_2.0.0_ga, attempting MIRRORS if available
ERROR: linux-imx-4.1.15-r0 do_fetch: Fetcher failure: Fetch command failed with exit code 128, output:
Cloning into bare repository '/home/jdepedro/nxp-release/downloads//git2/git.freescale.com.imx.linux-imx.git'...
error: inflate: data stream error (invalid distance too far back)
fatal: pack has bad object at offset 28071701: inflate returned -3
fatal: index-pack failed

I have tried several times (10?) today, but I have scripted it to keep trying.

Re: Yocto i.MX6 Linux Kernel git clone fail

gusarambula — Fri, 19 May 2017 16:16:28 GMT

Were you able to clone the repository of the problem still persists for you?

Re: Yocto i.MX6 Linux Kernel git clone fail

jdepedro — Sun, 21 May 2017 14:03:55 GMT

Finally I was able to clone it. Not sure if it was a problem with my local connection, or with the server.

Re: Yocto i.MX6 Linux Kernel git clone fail

gusarambula — Wed, 24 May 2017 15:20:51 GMT

I'm glad you were able to clone it! Apparently there has been some intermittent issues with the server.

Re: Yocto i.MX6 Linux Kernel git clone fail

surendradhobale — Thu, 25 May 2017 05:41:28 GMT

I have tried 2 times ,still no luck. Not able to fetch the linux-imx-4.1.15-ro.

Any solution? or its Server issue only.

Re: Yocto i.MX6 Linux Kernel git clone fail

gusarambula — Thu, 25 May 2017 13:08:36 GMT

Hello Surendra Dhobale,

What BSP are you using? Would you share the commands you’re using and on what documentation did you find them? I don’t recognize the inux-imx-4.1.15-ro tag.

Regards,

Re: Yocto i.MX6 Linux Kernel git clone fail

frk — Mon, 29 May 2017 12:05:14 GMT

git clone worked fine for me this morning. (y)

Re: Yocto i.MX6 Linux Kernel git clone fail

djoygaurav — Thu, 27 Jul 2017 11:51:06 GMT

Hi Gusarambula,

I am also facing the same error. But I was just wondering if this could be coz of Proxy also. Kindly let me know if working behind proxy gateway also does affect fetching this link. If yes, what do I have to do to make it work. Kindly help!!

Gaurav Kumar

Re: Yocto i.MX6 Linux Kernel git clone fail

djoygaurav — Fri, 28 Jul 2017 05:46:51 GMT

gusarambula‌ kindly look into the issue..

Re: Yocto i.MX6 Linux Kernel git clone fail

gusarambula — Fri, 28 Jul 2017 17:19:15 GMT

Hello Gaurav Kumar,

Working under a proxy does affect git and Yocto (as bitbake needs to fetch source code on real time).

There is some documentation regarding this as part of the Yocto Project, perhaps it may be of help:

Working Behind a Network Proxy - Yocto Project

Regards,

Re: Yocto i.MX6 Linux Kernel git clone fail

djoygaurav — Sat, 29 Jul 2017 11:42:22 GMT

gusarambula‌ Thank You for your quick response Gusarambula. But I am sorry to say that these all settings I have already done and still facing the same issue. Along with these settings, I made ~/.curlrc as well for proxy settings. Is there anything else I am required to do to make my bitbake fetch kernel and u-boot? Should I try changing their SRC_URI somewhere?? Kindly help!!

Re: Yocto i.MX6 Linux Kernel git clone fail

gusarambula — Mon, 31 Jul 2017 19:33:54 GMT

I'm sorry to hear you're having problems with your proxy. Changing SRC_URI wouldn't help as chances are you are not being able to fetch from any servers. You would need to make sure that the protocols can reach the servers and it would vary from proxy to proxy. If you can contact your network administrator I would recommend you requested help with this.