i.MX6Q UART2 Enabling Problem

mustafabakircio — Mon, 20 Mar 2017 23:25:06 GMT

Hello ;

I ' m working on Wandboard Quad which has iMX6Q processor on it . I opened it 's UART2 features from it 's imx6q-wandboard.dts but I have some problem about it and my mind is confused if I did right or missed something while enabling the UART2 .

I can send data from the UART2_TX but even if I set up the both console and ttymxc1 (UART2) baudrates same , I recieve nonsense character 's .

And I enabled from im6q-wandboard.dts adding ;

&uart2 {

pinctrl-names = "default";

pinctrl-0 = <&pinctrl_uart2_1>;

status = "okay" ;

};

Did I missing something or did I do something wrong about it ?

Thanks for your help ...

topic i.MX6Q UART2 Enabling Problem in i.MX Processors

i.MX6Q UART2 Enabling Problem