<?xml version="1.0" encoding="UTF-8"?>
<rss xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" xmlns:taxo="http://purl.org/rss/1.0/modules/taxonomy/" version="2.0">
  <channel>
    <title>i.MX ProcessorsのトピックIt is hanging before starting kernel.</title>
    <link>https://community.nxp.com/t5/i-MX-Processors/It-is-hanging-before-starting-kernel/m-p/597701#M89680</link>
    <description>&lt;HTML&gt;&lt;HEAD&gt;&lt;/HEAD&gt;&lt;BODY&gt;&lt;P&gt;Hi&lt;BR /&gt;I have MCIMXABASEV1, and MCIMX6QPAI&lt;STRONG&gt;CPU3&lt;/STRONG&gt;. &lt;BR /&gt;When booting from an SD card , It is hanging before starting kernel.&lt;BR /&gt;Following log messages are from the uart debug.&lt;/P&gt;&lt;P&gt;&lt;/P&gt;&lt;P&gt;&amp;gt;&amp;gt;&amp;gt;&amp;gt;&amp;gt;&amp;gt;&amp;gt;&amp;gt;&amp;gt;&amp;gt;&amp;gt;&amp;gt;&amp;gt;&amp;gt;&amp;gt;&amp;gt;&amp;gt;&amp;gt;&amp;gt;&amp;gt;&amp;gt;&amp;gt;&amp;gt;&amp;gt;&amp;gt;&amp;gt;&amp;gt;&amp;gt;&amp;gt;&amp;gt;&amp;gt;&amp;gt;&lt;BR /&gt;U-Boot 2014.04 (Oct 14 2016 - 15:15:28)&lt;/P&gt;&lt;P&gt;&lt;/P&gt;&lt;P&gt;CPU:&amp;nbsp;&amp;nbsp; Freescale i.MX6Q rev1.0 at 792 MHz&lt;BR /&gt;CPU:&amp;nbsp;&amp;nbsp; Temperature 18 C, calibration data: 0x5644ce7d&lt;BR /&gt;Reset cause: POR&lt;BR /&gt;Board: MX6-Sabreauto revA&lt;BR /&gt;I2C:&amp;nbsp;&amp;nbsp; ready&lt;BR /&gt;DRAM:&amp;nbsp; 2 GiB&lt;BR /&gt;NAND:&amp;nbsp; 0 MiB&lt;BR /&gt;MMC:&amp;nbsp;&amp;nbsp; FSL_SDHC: 0, FSL_SDHC: 1&lt;BR /&gt;No panel detected: default to Hannstar-XGA&lt;BR /&gt;Display: Hannstar-XGA (1024x768)&lt;BR /&gt;In:&amp;nbsp;&amp;nbsp;&amp;nbsp; serial&lt;BR /&gt;Out:&amp;nbsp;&amp;nbsp; serial&lt;BR /&gt;Err:&amp;nbsp;&amp;nbsp; serial&lt;BR /&gt;Found PFUZE100! deviceid=10,revid=21&lt;BR /&gt;mmc1 is current device&lt;BR /&gt;Net:&amp;nbsp;&amp;nbsp; FEC [PRIME]&lt;BR /&gt;Normal Boot&lt;BR /&gt;Hit any key to stop autoboot:&amp;nbsp; 0&lt;BR /&gt;mmc1 is current device&lt;BR /&gt;reading boot.scr&lt;BR /&gt;** Unable to read file boot.scr **&lt;BR /&gt;reading zImage&lt;BR /&gt;6987784 bytes read in 321 ms (20.8 MiB/s)&lt;BR /&gt;Booting from mmc ...&lt;BR /&gt;reading imx6q-sabreauto.dtb&lt;BR /&gt;44656 bytes read in 21 ms (2 MiB/s)&lt;BR /&gt;Kernel image @ 0x12000000 [ 0x000000 - 0x6aa008 ]&lt;BR /&gt;## Flattened Device Tree blob at 18000000&lt;BR /&gt;&amp;nbsp;&amp;nbsp; Booting using the fdt blob at 0x18000000&lt;BR /&gt;&lt;STRONG&gt;&amp;nbsp;&amp;nbsp; Using Device Tree in place at 18000000, end 1800de6f&lt;/STRONG&gt;&lt;/P&gt;&lt;P&gt;&lt;/P&gt;&lt;P&gt;&amp;lt;&amp;lt;&amp;lt;&amp;lt;&amp;lt;&amp;lt;&amp;lt;&amp;lt;&amp;lt;&amp;lt;&amp;lt;&amp;lt;&amp;lt;&amp;lt;&amp;lt;&amp;lt;&amp;lt;&amp;lt;&amp;lt;&amp;lt;&amp;lt;&amp;lt;&amp;lt;&amp;lt;&amp;lt;&lt;/P&gt;&lt;P&gt;&lt;/P&gt;&lt;P&gt;I cleaned up the environment variables stored on MMC/SD to their defaults.&lt;BR /&gt;I executed the following command in the UBoot :&lt;BR /&gt;U-Boot &amp;gt; env default -f -a&lt;BR /&gt;U-Boot &amp;gt; saveenv&lt;BR /&gt;U-Boot &amp;gt; reset&lt;BR /&gt;But there is same before.&lt;/P&gt;&lt;P&gt;&lt;/P&gt;&lt;P&gt;Just to be sure,&lt;BR /&gt;I tried to use the MGF tool IMX6_L4.1.15_2.0.0_MFG_TOOL (REV L4.1.15_2.0.0)&amp;nbsp; and, L4.1.15_2.0.0-ga_images_MX6QDLSOLO.&lt;/P&gt;&lt;P&gt;Both of them is failed to download images too.&lt;/P&gt;&lt;P&gt;Error message is &lt;STRONG&gt;""Boot" body="BootStrap" error, file="C:\Users\user\Downloads\android_m6.0.1_2.1.0_tool\android_m6.0.1_2.1.0_ga_tool\mfgtools\Profiles\Linux\OS Firmware\firmware\u-boot-imx6qsabresd_sd.imx""&lt;/STRONG&gt;&lt;/P&gt;&lt;P&gt;&lt;/P&gt;&lt;P&gt;I chaged the cpu3 board&amp;nbsp; to my cpu1 board that i purchared &lt;SPAN class=""&gt;in the past&lt;/SPAN&gt; time.&lt;/P&gt;&lt;P&gt;It booted sucessfully with the cpu1.&lt;/P&gt;&lt;P&gt;Other cpu3 boards failed to boot identically.&lt;/P&gt;&lt;P&gt;&lt;/P&gt;&lt;P&gt;Is the cpu3 boards defective? or Any ideas on what to try next?&lt;/P&gt;&lt;P&gt;&lt;SPAN style="color: #51626f; font-family: 'Helvetica Neue', Helvetica, Arial, 'Lucida Grande', sans-serif; font-size: 15px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: normal; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; background-color: #ffffff; display: inline !important; float: none;"&gt;&amp;nbsp;&lt;/SPAN&gt;&lt;/P&gt;&lt;P&gt;&lt;SPAN style="color: #51626f; font-family: 'Helvetica Neue', Helvetica, Arial, 'Lucida Grande', sans-serif; font-size: 15px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: normal; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; background-color: #ffffff; display: inline !important; float: none;"&gt;&lt;EM&gt;&lt;SPAN class=""&gt;&lt;SPAN class="" lang="en"&gt;&lt;EM class="" lang="en"&gt;&lt;/EM&gt;&lt;/SPAN&gt;&lt;/SPAN&gt;&lt;/EM&gt;&lt;SPAN class=""&gt;&lt;SPAN class="" lang="en"&gt;&lt;/SPAN&gt;&lt;/SPAN&gt;&lt;/SPAN&gt;&lt;/P&gt;&lt;/BODY&gt;&lt;/HTML&gt;</description>
    <pubDate>Tue, 25 Oct 2016 02:22:42 GMT</pubDate>
    <dc:creator>nanathan</dc:creator>
    <dc:date>2016-10-25T02:22:42Z</dc:date>
    <item>
      <title>It is hanging before starting kernel.</title>
      <link>https://community.nxp.com/t5/i-MX-Processors/It-is-hanging-before-starting-kernel/m-p/597701#M89680</link>
      <description>&lt;HTML&gt;&lt;HEAD&gt;&lt;/HEAD&gt;&lt;BODY&gt;&lt;P&gt;Hi&lt;BR /&gt;I have MCIMXABASEV1, and MCIMX6QPAI&lt;STRONG&gt;CPU3&lt;/STRONG&gt;. &lt;BR /&gt;When booting from an SD card , It is hanging before starting kernel.&lt;BR /&gt;Following log messages are from the uart debug.&lt;/P&gt;&lt;P&gt;&lt;/P&gt;&lt;P&gt;&amp;gt;&amp;gt;&amp;gt;&amp;gt;&amp;gt;&amp;gt;&amp;gt;&amp;gt;&amp;gt;&amp;gt;&amp;gt;&amp;gt;&amp;gt;&amp;gt;&amp;gt;&amp;gt;&amp;gt;&amp;gt;&amp;gt;&amp;gt;&amp;gt;&amp;gt;&amp;gt;&amp;gt;&amp;gt;&amp;gt;&amp;gt;&amp;gt;&amp;gt;&amp;gt;&amp;gt;&amp;gt;&lt;BR /&gt;U-Boot 2014.04 (Oct 14 2016 - 15:15:28)&lt;/P&gt;&lt;P&gt;&lt;/P&gt;&lt;P&gt;CPU:&amp;nbsp;&amp;nbsp; Freescale i.MX6Q rev1.0 at 792 MHz&lt;BR /&gt;CPU:&amp;nbsp;&amp;nbsp; Temperature 18 C, calibration data: 0x5644ce7d&lt;BR /&gt;Reset cause: POR&lt;BR /&gt;Board: MX6-Sabreauto revA&lt;BR /&gt;I2C:&amp;nbsp;&amp;nbsp; ready&lt;BR /&gt;DRAM:&amp;nbsp; 2 GiB&lt;BR /&gt;NAND:&amp;nbsp; 0 MiB&lt;BR /&gt;MMC:&amp;nbsp;&amp;nbsp; FSL_SDHC: 0, FSL_SDHC: 1&lt;BR /&gt;No panel detected: default to Hannstar-XGA&lt;BR /&gt;Display: Hannstar-XGA (1024x768)&lt;BR /&gt;In:&amp;nbsp;&amp;nbsp;&amp;nbsp; serial&lt;BR /&gt;Out:&amp;nbsp;&amp;nbsp; serial&lt;BR /&gt;Err:&amp;nbsp;&amp;nbsp; serial&lt;BR /&gt;Found PFUZE100! deviceid=10,revid=21&lt;BR /&gt;mmc1 is current device&lt;BR /&gt;Net:&amp;nbsp;&amp;nbsp; FEC [PRIME]&lt;BR /&gt;Normal Boot&lt;BR /&gt;Hit any key to stop autoboot:&amp;nbsp; 0&lt;BR /&gt;mmc1 is current device&lt;BR /&gt;reading boot.scr&lt;BR /&gt;** Unable to read file boot.scr **&lt;BR /&gt;reading zImage&lt;BR /&gt;6987784 bytes read in 321 ms (20.8 MiB/s)&lt;BR /&gt;Booting from mmc ...&lt;BR /&gt;reading imx6q-sabreauto.dtb&lt;BR /&gt;44656 bytes read in 21 ms (2 MiB/s)&lt;BR /&gt;Kernel image @ 0x12000000 [ 0x000000 - 0x6aa008 ]&lt;BR /&gt;## Flattened Device Tree blob at 18000000&lt;BR /&gt;&amp;nbsp;&amp;nbsp; Booting using the fdt blob at 0x18000000&lt;BR /&gt;&lt;STRONG&gt;&amp;nbsp;&amp;nbsp; Using Device Tree in place at 18000000, end 1800de6f&lt;/STRONG&gt;&lt;/P&gt;&lt;P&gt;&lt;/P&gt;&lt;P&gt;&amp;lt;&amp;lt;&amp;lt;&amp;lt;&amp;lt;&amp;lt;&amp;lt;&amp;lt;&amp;lt;&amp;lt;&amp;lt;&amp;lt;&amp;lt;&amp;lt;&amp;lt;&amp;lt;&amp;lt;&amp;lt;&amp;lt;&amp;lt;&amp;lt;&amp;lt;&amp;lt;&amp;lt;&amp;lt;&lt;/P&gt;&lt;P&gt;&lt;/P&gt;&lt;P&gt;I cleaned up the environment variables stored on MMC/SD to their defaults.&lt;BR /&gt;I executed the following command in the UBoot :&lt;BR /&gt;U-Boot &amp;gt; env default -f -a&lt;BR /&gt;U-Boot &amp;gt; saveenv&lt;BR /&gt;U-Boot &amp;gt; reset&lt;BR /&gt;But there is same before.&lt;/P&gt;&lt;P&gt;&lt;/P&gt;&lt;P&gt;Just to be sure,&lt;BR /&gt;I tried to use the MGF tool IMX6_L4.1.15_2.0.0_MFG_TOOL (REV L4.1.15_2.0.0)&amp;nbsp; and, L4.1.15_2.0.0-ga_images_MX6QDLSOLO.&lt;/P&gt;&lt;P&gt;Both of them is failed to download images too.&lt;/P&gt;&lt;P&gt;Error message is &lt;STRONG&gt;""Boot" body="BootStrap" error, file="C:\Users\user\Downloads\android_m6.0.1_2.1.0_tool\android_m6.0.1_2.1.0_ga_tool\mfgtools\Profiles\Linux\OS Firmware\firmware\u-boot-imx6qsabresd_sd.imx""&lt;/STRONG&gt;&lt;/P&gt;&lt;P&gt;&lt;/P&gt;&lt;P&gt;I chaged the cpu3 board&amp;nbsp; to my cpu1 board that i purchared &lt;SPAN class=""&gt;in the past&lt;/SPAN&gt; time.&lt;/P&gt;&lt;P&gt;It booted sucessfully with the cpu1.&lt;/P&gt;&lt;P&gt;Other cpu3 boards failed to boot identically.&lt;/P&gt;&lt;P&gt;&lt;/P&gt;&lt;P&gt;Is the cpu3 boards defective? or Any ideas on what to try next?&lt;/P&gt;&lt;P&gt;&lt;SPAN style="color: #51626f; font-family: 'Helvetica Neue', Helvetica, Arial, 'Lucida Grande', sans-serif; font-size: 15px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: normal; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; background-color: #ffffff; display: inline !important; float: none;"&gt;&amp;nbsp;&lt;/SPAN&gt;&lt;/P&gt;&lt;P&gt;&lt;SPAN style="color: #51626f; font-family: 'Helvetica Neue', Helvetica, Arial, 'Lucida Grande', sans-serif; font-size: 15px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: normal; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; background-color: #ffffff; display: inline !important; float: none;"&gt;&lt;EM&gt;&lt;SPAN class=""&gt;&lt;SPAN class="" lang="en"&gt;&lt;EM class="" lang="en"&gt;&lt;/EM&gt;&lt;/SPAN&gt;&lt;/SPAN&gt;&lt;/EM&gt;&lt;SPAN class=""&gt;&lt;SPAN class="" lang="en"&gt;&lt;/SPAN&gt;&lt;/SPAN&gt;&lt;/SPAN&gt;&lt;/P&gt;&lt;/BODY&gt;&lt;/HTML&gt;</description>
      <pubDate>Tue, 25 Oct 2016 02:22:42 GMT</pubDate>
      <guid>https://community.nxp.com/t5/i-MX-Processors/It-is-hanging-before-starting-kernel/m-p/597701#M89680</guid>
      <dc:creator>nanathan</dc:creator>
      <dc:date>2016-10-25T02:22:42Z</dc:date>
    </item>
  </channel>
</rss>

