topic Re: SCM i.MX6Dual package in i.MX Processors

SCM i.MX6Dual package

kathysaghi — Wed, 20 Jul 2016 19:55:20 GMT

Where can I find a schematic symbol, footprint and 3D model for SCM i.MX6Dual package?

Re: SCM i.MX6Dual package

danwei_luo — Fri, 22 Jul 2016 05:07:35 GMT

Hi Kathy,

You can find the schematics of i.MX6Dual in this following link:

i.MX 6Dual Processors|Advanced 3D Graphics|NXP

-----------------------------------------------------------------------------------------------------------------------

Note: If this post answers your question, please click the Correct Answer button. Thank you!

-----------------------------------------------------------------------------------------------------------------------

Best regards,

Danwei Luo

Re: SCM i.MX6Dual package

Rita_Wang — Fri, 22 Jul 2016 08:42:13 GMT

Hi Kathy,

About the schematic you can see the follows link:

Quick Start Board for SCM-i.MX 6DQ|NXP

And about the SCM-i.MX6D information you can see :

Single Chip Module-i.MX 6D|NXP

Single Chip System Modules (SCM)|NXP
Have a great day,
Dan

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Mark Correct button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: SCM i.MX6Dual package

kathysaghi — Fri, 22 Jul 2016 18:59:15 GMT

Hi Danwei,

Thank you for your response. I don't think I was clear in what I need. I am looking for the symbol for the SCM i.MX6Dual to drop into my schematic for my board design. Also, I am looking for the PCB footprint of the BGA package (BGA456C65P19x24_1400x1700x111) to drop into my layout, as well as the 3D step file. I am using Altium for my design tool. When I go to the link you provided, I am seeing schematics for a board, not just the symbol for this part.

Regards,

Kathy