i.MX ProcessorsのトピックERROR: User requested feature sdl

ERROR: User requested feature sdl

luluxu — Wed, 29 Jun 2016 03:56:29 GMT

Hi,

I followed the "Freescale_Yocto_Project_User's_Guide.pdf" to setup the PC host and yocto, and eventually trying to run:

$> bitbake fsl-image-qt5

But I received the following error.

| ERROR: User requested feature sdl

| configure was not able to find it.

| Install SDL devel

| WARNING: exit code 1 from a shell command.

| ERROR: Function failed: do_configure (log file is located at /opt/workspace/fsl-release-bsp/build/tmp/work/x86_64-linux/qemu-native/2.2.0-r1/temp/log.do_configure.26672).

Someone can help me!

Re: ERROR: User requested feature sdl

igorpadykov — Wed, 29 Jun 2016 07:06:49 GMT

Hi lulu

qemu is not supported, for QT building one can look at

Building Qt5 for i.MX6 with YOCTO

Yocto Training - HOME

Best regards

igor

-----------------------------------------------------------------------------------------------------------------------

Note: If this post answers your question, please click the Correct Answer button. Thank you!

-----------------------------------------------------------------------------------------------------------------------

Re: ERROR: User requested feature sdl

luluxu — Wed, 29 Jun 2016 09:06:32 GMT

Thinks

Re: ERROR: User requested feature sdl

simontremblay — Wed, 17 Aug 2016 17:44:34 GMT

In case someone still gets this error, have a look to:

https://bugzilla.yoctoproject.org/show_bug.cgi?id=8553

Add:

BUILD_LDFLAGS_prepend_pn-qemu-native = "-Wl,-rpath-link,/lib/x86_64-linux-gnu "

to your local.conf file.

Sim