i.MX Processorsのトピックi.MX53 Hardware Design - wall comments https://community.nxp.com/t5/i-MX-Processors/i-MX53-Hardware-Design-wall-comments/m-p/150103#M882 <HTML><HEAD></HEAD><BODY><SPAN>Forum for people doing custom mx53 based hardware</SPAN></BODY></HTML> Tue, 08 Mar 2011 21:06:45 GMT MXLuser 2011-03-08T21:06:45Z i.MX53 Hardware Design - wall comments https://community.nxp.com/t5/i-MX-Processors/i-MX53-Hardware-Design-wall-comments/m-p/150103#M882 <HTML><HEAD></HEAD><BODY><SPAN>Forum for people doing custom mx53 based hardware</SPAN></BODY></HTML> Tue, 08 Mar 2011 21:06:45 GMT https://community.nxp.com/t5/i-MX-Processors/i-MX53-Hardware-Design-wall-comments/m-p/150103#M882 MXLuser 2011-03-08T21:06:45Z Re: i.MX53 Hardware Design - wall comments https://community.nxp.com/t5/i-MX-Processors/i-MX53-Hardware-Design-wall-comments/m-p/150104#M883 <HTML><HEAD></HEAD><BODY><P>Has anyone done a design with an iMX535 - MC34708 that charges&nbsp;a battery via the USB OTG port?&nbsp; The OTG port needs to ; 1 act as a host and power a USB flash drive etc., 2 act as a device, connected to a PC and charge the battery, 3 act as a charging port conected to a USB wall adaptor.&nbsp; The MC34708 data sheet states the part has this functionality, but gives no examples of how to hook it up to&nbsp;the iMX.&nbsp; Any help would be appreciated.&nbsp; John&nbsp;</P></BODY></HTML> Wed, 25 Jul 2012 18:51:12 GMT https://community.nxp.com/t5/i-MX-Processors/i-MX53-Hardware-Design-wall-comments/m-p/150104#M883 JohnMcCosh 2012-07-25T18:51:12Z