topic Re: How to configure and build Qt5.5.1 for INTEGRITY(i.MX6) in i.MX Processors

How to configure and build Qt5.5.1 for INTEGRITY(i.MX6)

bharathadwajako — Fri, 05 Aug 2016 09:21:53 GMT

Hello all,

I would like to know how to configure and build Qt5.5.1 for INTEGRITY??

Host: Windows Target: INTEGRITY

Thanks & Regards

Bharathdwaj K

jimmychan — Mon, 08 Aug 2016 07:18:21 GMT

what is the INTEGRITY board?

bharathadwajako — Mon, 08 Aug 2016 08:08:27 GMT

It is an NXP Dual Cortex-A9 CPU Core within the NXP(Freescale) i.MX6

On Mon, Aug 8, 2016 at 9:19 AM, jimmychan <admin@community.freescale.com>

jimmychan — Mon, 08 Aug 2016 08:18:32 GMT

The processor is using i.MX6D.

I am not sure the "INTEGRITY" is the name of your board. Basically, there is BSP for the board. You can build the QT with the BSP.

bharathadwajako — Mon, 08 Aug 2016 08:26:27 GMT

Yeah INTEGRITY is the real time operating system for I.MX6D processor.

Board has BSP. Now the problem is how to build QT with the BSP. I need some

reference.

On Mon, Aug 8, 2016 at 10:19 AM, jimmychan <admin@community.freescale.com>

jimmychan — Mon, 08 Aug 2016 08:46:48 GMT

BSP is board specific. So, it is better to ask the BSP provider to provide the information how to build the BSP.

For this example, you can ask iWave to show you the steps (something like BSP user guide) for how to build the BSP or QT for this iWave board.

This is our BSP and our reference design Board

bharathadwajako — Mon, 08 Aug 2016 08:52:15 GMT

Yeah, Thanks for the information:)

On Mon, Aug 8, 2016 at 10:47 AM, jimmychan <admin@community.freescale.com>