i.MX Processors中的主题 Re: enable serial driver

enable serial driver

santhosha — Mon, 11 Jul 2016 12:06:13 GMT

how to enable/disable the serial driver in the imx6 bsp? And also how to configure the baud rate etc in this bsp.

I am trying to get a minimum bsp that provides a serial console output on which I can enter commands to check the system.

I am using a custom board and not the evaluation board of imx6 solo.

Please guide.

aravinthkumarja — Tue, 12 Jul 2016 04:56:34 GMT

In imx6 bsp you can check available serial ports by using below command,

=> ls /dev/tty*

Below command for configure baudrate,

=> stty -F /dev/ttymxc1 115200

Note: for example i given "ttymxc1" you can this port name, with respect to your needed serial port.

Regards,

Aravinth

jimmychan — Tue, 12 Jul 2016 08:36:55 GMT

One more information for you, please download the BSP document from here:

You can find all the driver information from the i.MX_Linux_Reference_Manual.pdf