i.MX ProcessorsのトピックRe: Programming eMMC on iMX6UL

i.MX ProcessorsのトピックRe: Programming eMMC on iMX6UL https://community.nxp.com/t5/i-MX-Processors/Programming-eMMC-on-iMX6UL/m-p/551410#M86227 <HTML><HEAD></HEAD><BODY><P><A class="jx-jive-macro-user" href="https://community.nxp.com/people/igorpadykov">igorpadykov</A> can you continue with this case?</P></BODY></HTML> Wed, 29 Jun 2016 15:29:26 GMT karina_valencia 2016-06-29T15:29:26Z Programming eMMC on iMX6UL https://community.nxp.com/t5/i-MX-Processors/Programming-eMMC-on-iMX6UL/m-p/551405#M86222 <HTML><HEAD></HEAD><BODY><P>I replaced the SDcard on my iMX6UL-EVK with an eMMC.</P><P></P><P>When I try to use mfgtool2 I am getting the following error on my console</P><DIV>U-Boot 2015.04-imx_v2015.04_4.1.15_1.0.0_ga+gd7d7c43 (Apr 01 2016 - 10:03:58)<P></P><P>CPU:   Freescale i.MX6UL rev1.0 at 396 MHz</P><P>CPU:   Temperature 41 C</P><P>Reset cause: POR</P><P>Board: MX6UL 14X14 DDR3 ARM2</P><P>I2C:   ready</P><P>DRAM:  1 GiB</P><P>force_idle_bus: sda=0 scl=0 <A href="http://sda.gp/" target="_blank">sda.gp</A>=0x3 <A href="http://scl.gp/" target="_blank">scl.gp</A>=0x2</P><P>Can't find PMIC:PFUZE100</P><P>initcall sequence bff92ee8 failed at call 87803298 (err=-1)</P><P>### ERROR ### Please RESET the board ###</P><P>Attached is the cfg.ini file I am using.</P><P>Also attached is the log file.</P><P>Presumably  I am not picking up the right device tree, but I wasn't able to figure out how to do it.</P><P>I was also not sure how to rebuild u-boot with emmc for the imx6ulevk.</P><P></P><P><STRONG>cfg.ini</STRONG></P><P>[profiles]</P><P>chip = Linux</P><P></P><P></P><P>[platform]</P><P>board = SabreSD </P><P></P><P></P><P>[LIST]</P><P>name = eMMC </P><P></P><P></P><P>[variable]</P><P>board = sabresd</P><P>mmc = 1</P><P>sxuboot=sabresd</P><P>sxdtb=sdb</P><P>7duboot=sabresd</P><P>7ddtb=sdb</P><P>6uluboot=14x14ddr3arm2</P><P>6uldtb=14x14-ddr3-arm2</P><P>ldo=</P><P>plus=</P><P>initramfs=fsl-image-mfgtool-initramfs-imx_mfgtools.cpio.gz.u-boot</P><P>seek = 1</P><P>sxnor=qspi2</P><P>7dnor=qspi1</P><P>6ulnor=qspi1</P><P>nor_part=0</P><P></P><P><STRONG>MfgTool.log</STRONG></P><P></P><P>DLL version: 2.6.2</P><P>Friday, June 17, 2016 14:33:56   Start new logging</P><P>ModuleID[2] LevelID[10]: CMyExceptionHandler thread is running</P><P>ModuleID[2] LevelID[1]: new MxHidDeviceClass</P><P>ModuleID[2] LevelID[10]: new MxHidDevice[00F405F0]</P><P>ModuleID[2] LevelID[1]: new MxHidDeviceClass</P><P>ModuleID[2] LevelID[10]: new MxHidDevice[00F40B80]</P><P>ModuleID[2] LevelID[1]: new MxHidDeviceClass</P><P>ModuleID[2] LevelID[10]: new MxHidDevice[00FEDE30]</P><P>ModuleID[2] LevelID[1]: new MxHidDeviceClass</P><P>ModuleID[2] LevelID[10]: new MxHidDevice[00FEE300]</P><P>ModuleID[2] LevelID[1]: new MxHidDeviceClass</P><P>ModuleID[2] LevelID[10]: new MxHidDevice[00FEE7D0]</P><P>ModuleID[2] LevelID[1]: new MxHidDeviceClass</P><P>ModuleID[2] LevelID[10]: new MxHidDevice[00FEAE20]</P><P>ModuleID[2] LevelID[10]: Device Manager thread is running</P><P>ModuleID[2] LevelID[1]: Can't set m_hStopEvent before it initialized or it already stop</P><P></P><P></P><P>ModuleID[2] LevelID[10]: CmdOperation[0] device chagned and reset to state 0</P><P>ModuleID[2] LevelID[10]: CmdOperation[0], skip current command, so SetEvent(hDevCanDeleteEvent)</P><P>ModuleID[2] LevelID[10]: CmdOperation[0], skip current command, so SetEvent(hDevCanDeleteEvent)</P><P>ModuleID[2] LevelID[10]: CmdOperation[0], skip current command, so SetEvent(hDevCanDeleteEvent)</P><P>ModuleID[2] LevelID[10]: CmdOperation[0], skip current command, so SetEvent(hDevCanDeleteEvent)</P><P>ModuleID[2] LevelID[10]: ExecuteCommand--Boot[WndIndex:0], File is \\Mac\Home\Downloads\L4.1.15_1.1.0_ga-mfg-tools\mfgtools\Profiles\Linux\OS Firmware\firmware\u-boot-imx6ul14x14ddr3arm2_emmc.imx</P><P>ModuleID[2] LevelID[1]: MxHidDevice::Write() Error writing to device 0x1f.</P><P>ModuleID[2] LevelID[1]: Failed to initialize memory!</P><P>ModuleID[2] LevelID[1]: PortMgrDlg(0)--MxHidDevice--Command Boot excute failed</P><P>ModuleID[2] LevelID[10]: CmdOperation[0], current command executed failed, so SetEvent(hDevCanDeleteEvent)</P><P>ModuleID[2] LevelID[10]: DeviceManager::DevChangeWnd::OnDeviceChange() - DEVICE_REMOVAL_EVT(\\?\USB#VID_15A2&PID_007D#5&19f4c0d2&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed})</P><P>ModuleID[2] LevelID[10]: DeviceManager::DevChangeWnd::OnDeviceChange() - end</P><P>ModuleID[2] LevelID[10]: DeviceManager::OnMsgDeviceEvent() - DEVICE_REMOVAL_EVT(\\?\USB#VID_15A2&PID_007D#5&19f4c0d2&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed})</P><P>ModuleID[2] LevelID[10]: DeviceClass::FindDeviceByUsbPath--DeviceListType_Current, _devices.size: 1</P><P>ModuleID[2] LevelID[10]: DeviceClass::FindDeviceByUsbPath--DeviceListType_Current, devInstPathToFind: USB\VID_15A2&PID_007D\5&19F4C0D2&0&2, _deviceInstanceID: USB\VID_15A2&PID_007D\5&19F4C0D2&0&2</P><P>ModuleID[2] LevelID[10]: DeviceClass::FindDeviceByUsbPath--DeviceListType_Current, Find the device</P><P>ModuleID[2] LevelID[10]: DeviceManager::OnMsgDeviceEvent() - DEVICE_REMOVAL_EVT,[MxHidDeviceClass] vid_15a2&pid_007d, Hub:3-Port:2</P><P>ModuleID[2] LevelID[10]: DeviceManager::OnMsgDeviceEvent() - DEVICE_REMOVAL_EVT, Notify</P><P>ModuleID[2] LevelID[10]: CmdOpreation[0]--OnDeviceChangeNotify, Volume Arrive/Remove or Device Arrive/Remove</P><P>ModuleID[2] LevelID[10]: CmdOpreation[0]--OnDeviceChangeNotify, m_p_usb_port is not NULL, so only refresh</P><P>ModuleID[2] LevelID[10]: CmdOpreation[0]--OnDeviceChangeNotify, Volume/Device Remove</P><P>ModuleID[2] LevelID[1]: CmdOpreation[0]--set m_hDeviceRemoveEvent.</P><P>ModuleID[2] LevelID[10]: CmdOpreation[0]--WaitforEvents device remove1</P><P>ModuleID[2] LevelID[10]: DeviceManager::OnMsgDeviceEvent()-DEVICE_REMOVAL_EVT, hDevCanDeleteEvent has been set</P><P>ModuleID[2] LevelID[10]: delete MxHidDevice[00FEAE20]</P><P>ModuleID[2] LevelID[10]: DeviceManager::DevChangeWnd::OnDeviceChange() - DEVICE_ARRIVAL_EVT(\\?\USB#VID_15A2&PID_007D#5&19f4c0d2&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed})</P><P>ModuleID[2] LevelID[10]: DeviceManager::DevChangeWnd::OnDeviceChange() - end</P><P>ModuleID[2] LevelID[10]: DeviceManager::OnMsgDeviceEvent() - DEVICE_ARRIVAL_EVT(\\?\USB#VID_15A2&PID_007D#5&19f4c0d2&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed})</P><P>ModuleID[2] LevelID[10]: DeviceClass::FindDeviceByUsbPath--DeviceListType_Current, _devices.size: 0</P><P>ModuleID[2] LevelID[1]: DeviceClass::FindDeviceByUsbPath() - DeviceListType_New--index: 0</P><P>ModuleID[2] LevelID[1]: DeviceClass::FindDeviceByUsbPath() - DeviceListType_New--devPath: \\?\hid#vid_203a&pid_fffc&mi_00#7&37099d97&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}</P><P>ModuleID[2] LevelID[1]: DeviceClass::FindDeviceByUsbPath() - DeviceListType_New--index: 1</P><P>ModuleID[2] LevelID[1]: DeviceClass::FindDeviceByUsbPath() - DeviceListType_New--devPath: \\?\hid#vid_203a&pid_fffc&mi_01#7&2de99099&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}</P><P>ModuleID[2] LevelID[1]: DeviceClass::FindDeviceByUsbPath() - DeviceListType_New--index: 2</P><P>ModuleID[2] LevelID[1]: DeviceClass::FindDeviceByUsbPath() - DeviceListType_New--devPath: \\?\hid#vid_15a2&pid_007d#6&2b1540c8&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}</P><P>ModuleID[2] LevelID[10]: new MxHidDevice[00FEAE20]</P><P>ModuleID[2] LevelID[10]: DeviceClass::FindDeviceByUsbPath--DeviceListType_New, devInstPathToFind: USB\VID_15A2&PID_007D\5&19F4C0D2&0&2, _deviceInstanceID: USB\VID_15A2&PID_007D\5&19F4C0D2&0&2</P><P>ModuleID[2] LevelID[10]: DeviceClass::FindDeviceByUsbPath--DeviceListType_New, Find the device, Port: 2</P><P>ModuleID[2] LevelID[10]: DeviceClass::AddUsbDevice() successful USB#VID_15A2&PID_007D#5&19F4C0D2&0&2#{A5DCBF10-6530-11D2-901F-00C04FB951ED} add to current list, retrycount: 0</P><P>ModuleID[2] LevelID[10]: DeviceManager::OnMsgDeviceEvent() - DEVICE_ARRIVAL_EVT,[MxHidDeviceClass] vid_15a2&pid_007d, Hub:3-Port:2</P><P>ModuleID[2] LevelID[10]: DeviceManager::OnMsgDeviceEvent() - DEVICE_ARRIVAL_EVT, Notify</P><P>ModuleID[2] LevelID[10]: CmdOpreation[0]--OnDeviceChangeNotify, Volume Arrive/Remove or Device Arrive/Remove</P><P>ModuleID[2] LevelID[10]: CmdOpreation[0]--OnDeviceChangeNotify, m_p_usb_port is not NULL, so only refresh</P><P>ModuleID[2] LevelID[10]: CmdOpreation[0]--OnDeviceChangeNotify, Volume/Device Arrive</P><P>ModuleID[2] LevelID[1]: CmdOpreation[0]--set m_hDeviceArriveEvent.</P><P>ModuleID[2] LevelID[10]: CmdOpreation[0]--WaitforEvents device arrive1</P><P>ModuleID[2] LevelID[10]: CmdOperation[0] device chagned and reset to state 0</P><P>ModuleID[2] LevelID[10]: CmdOperation[0], skip current command, so SetEvent(hDevCanDeleteEvent)</P><P>ModuleID[2] LevelID[10]: CmdOperation[0], skip current command, so SetEvent(hDevCanDeleteEvent)</P><P>ModuleID[2] LevelID[10]: CmdOperation[0], skip current command, so SetEvent(hDevCanDeleteEvent)</P><P>ModuleID[2] LevelID[10]: CmdOperation[0], skip current command, so SetEvent(hDevCanDeleteEvent)</P><P>ModuleID[2] LevelID[10]: ExecuteCommand--Boot[WndIndex:0], File is \\Mac\Home\Downloads\L4.1.15_1.1.0_ga-mfg-tools\mfgtools\Profiles\Linux\OS Firmware\firmware\u-boot-imx6ul14x14ddr3arm2_emmc.imx</P><P>ModuleID[2] LevelID[10]: CmdOperation[0], skip current command, so SetEvent(hDevCanDeleteEvent)</P><P>ModuleID[2] LevelID[10]: ExecuteCommand--Load[WndIndex:0], File is \\Mac\Home\Downloads\L4.1.15_1.1.0_ga-mfg-tools\mfgtools\Profiles\Linux\OS Firmware\firmware\zImage, address is 0x80800000</P><P>ModuleID[2] LevelID[10]: PortMgrDlg(0)--Command Load excute successfully, retry count: 0</P><P>ModuleID[2] LevelID[10]: CmdOperation[0], skip current command, so SetEvent(hDevCanDeleteEvent)</P><P>ModuleID[2] LevelID[10]: ExecuteCommand--Load[WndIndex:0], File is \\Mac\Home\Downloads\L4.1.15_1.1.0_ga-mfg-tools\mfgtools\Profiles\Linux\OS Firmware\firmware\fsl-image-mfgtool-initramfs-imx_mfgtools.cpio.gz.u-boot, address is 0x83800000</P><P>ModuleID[2] LevelID[10]: PortMgrDlg(0)--Command Load excute successfully, retry count: 0</P><P>ModuleID[2] LevelID[10]: CmdOperation[0], skip current command, so SetEvent(hDevCanDeleteEvent)</P><P>ModuleID[2] LevelID[10]: CmdOperation[0], skip current command, so SetEvent(hDevCanDeleteEvent)</P><P>ModuleID[2] LevelID[10]: CmdOperation[0], skip current command, so SetEvent(hDevCanDeleteEvent)</P><P>ModuleID[2] LevelID[10]: CmdOperation[0], skip current command, so SetEvent(hDevCanDeleteEvent)</P><P>ModuleID[2] LevelID[10]: ExecuteCommand--Load[WndIndex:0], File is \\Mac\Home\Downloads\L4.1.15_1.1.0_ga-mfg-tools\mfgtools\Profiles\Linux\OS Firmware\firmware\zImage-imx6ul-14x14-ddr3-arm2-emmc.dtb, address is 0x83000000</P><P>ModuleID[2] LevelID[10]: PortMgrDlg(0)--Command Load excute successfully, retry count: 0</P><P>ModuleID[2] LevelID[10]: ExecuteCommand--Jump[WndIndex:0]</P><P>ModuleID[2] LevelID[10]: *********MxHidDevice[00FEAE20] Jump to Ramkernel successfully!**********</P><P>ModuleID[2] LevelID[10]: CmdOperation[0], current state command has been finished and the last command is successful, so SetEvent(hDevCanDeleteEvent)</P><P></P><P></P><P></P></DIV></BODY></HTML> Mon, 20 Jun 2016 14:16:37 GMT https://community.nxp.com/t5/i-MX-Processors/Programming-eMMC-on-iMX6UL/m-p/551405#M86222 sajiddalvi 2016-06-20T14:16:37Z Re: Programming eMMC on iMX6UL https://community.nxp.com/t5/i-MX-Processors/Programming-eMMC-on-iMX6UL/m-p/551406#M86223 <HTML><HEAD></HEAD><BODY><P>Hi sajid</P><P></P><P>one can try to add:in uboot</P><P>..include/configs/mx6ul_14x14_evk.h</P><P>#define CONFIG_MX6UL_EVK_EMMC_REWORK</P><P>and attached ucl2.xml</P><P></P><P>Best regards</P><P>igor</P><P>-----------------------------------------------------------------------------------------------------------------------</P><P>Note: If this post answers your question, please click the Correct Answer button. Thank you!</P><P>-----------------------------------------------------------------------------------------------------------------------</P></BODY></HTML> Tue, 21 Jun 2016 00:35:03 GMT https://community.nxp.com/t5/i-MX-Processors/Programming-eMMC-on-iMX6UL/m-p/551406#M86223 igorpadykov 2016-06-21T00:35:03Z Re: Programming eMMC on iMX6UL https://community.nxp.com/t5/i-MX-Processors/Programming-eMMC-on-iMX6UL/m-p/551407#M86224 <HTML><HEAD></HEAD><BODY><P>Still not clear about how to build uboot for emmc.</P><P></P><P>I made the change to the include file you recommended in </P><P>fsl-release-bsp/build/tmp/work/imx6ulevk-poky-linux-gnueabi/u-boot-imx/2015.04-r0/git/include/configs/mx6ul_14x14_evk.h</P><P>/* MMC Configs */</P><P>#define CONFIG_MX6UL_EVK_EMMC_REWORK //sajid</P><P>#define CONFIG_FSL_USDHC</P><P></P><P>I then rebuilt uboot with the following commands :</P><P>bitbake -f -c compile u-boot-imx</P><P>bitbake  u-boot-imx</P><P><BR />I then checked fsl-release-bsp/build/tmp/work/imx6ulevk-poky-linux-gnueabi/u-boot-imx/2015.04-r0/image/boot<BR />I see u-boot-sd-2015.04-r0.imx being created.</P><P></P><P>Question 1 : I don't see the -emmc- in the file name and based on the ucl2.xml provided it seems that this is what should be expected for an emmc device. Will the -sd- file still work on an emmc device?</P><P></P><P>Question 2 : Looking at the usage of CONFIG_MX6UL_EVK_EMMC_REWORK there seems to be some change to the SDIO interface. What is this change?</P><P></P><P>Question 3 : Also i don't understand how this addresses the error I am seeing : <SPAN style="color: #51626f; font-family: arial, helvetica, 'helvetica neue', verdana, sans-serif;">Can't find PMIC:PFUZE100. Will the ucl2.xml you provided pick up the appropriate device tree changes to fix this problem?</SPAN></P><P></P><P><SPAN style="color: #51626f; font-family: arial, helvetica, 'helvetica neue', verdana, sans-serif;">Appreciate your support.</SPAN></P></BODY></HTML> Tue, 21 Jun 2016 04:12:24 GMT https://community.nxp.com/t5/i-MX-Processors/Programming-eMMC-on-iMX6UL/m-p/551407#M86224 sajiddalvi 2016-06-21T04:12:24Z Re: Programming eMMC on iMX6UL https://community.nxp.com/t5/i-MX-Processors/Programming-eMMC-on-iMX6UL/m-p/551408#M86225 <HTML><HEAD></HEAD><BODY><P>CONFIG_MX6UL_EVK_EMMC_REWORK needs to enable whole 8bit data pin of eMMC.</P><P>iMX6UL-EVK does not use <SPAN style="color: #51626f; font-family: arial, helvetica, 'helvetica neue', verdana, sans-serif;">PFUZE100.</SPAN></P><P></P><P><SPAN style="color: #51626f; font-family: arial, helvetica, 'helvetica neue', verdana, sans-serif;">~igor</SPAN></P></BODY></HTML> Tue, 21 Jun 2016 06:39:06 GMT https://community.nxp.com/t5/i-MX-Processors/Programming-eMMC-on-iMX6UL/m-p/551408#M86225 igorpadykov 2016-06-21T06:39:06Z Re: Programming eMMC on iMX6UL https://community.nxp.com/t5/i-MX-Processors/Programming-eMMC-on-iMX6UL/m-p/551409#M86226 <HTML><HEAD></HEAD><BODY><P>I made the u-boot change you recommended and used the zImage and .dtb from the yocto deploy dir that I have working with the imxul6evk with SD card.</P><P></P><P>Now it seems uboot flashes the kernel correctly (I see the expected drivers to be loaded),</P><P>but then the console gets get stuck here :</P><P>UTP : Waiting for device to appear.</P><P></P><P>Looking through the forum it seems that this may be because of the wrong initramfs.</P><P>I am using the default one that mfgtool picks up :</P><P>fsl-image-mfgtool-initramfs-imx_mfgtools.cpio.gz.u-boot</P></BODY></HTML> Tue, 21 Jun 2016 16:56:54 GMT https://community.nxp.com/t5/i-MX-Processors/Programming-eMMC-on-iMX6UL/m-p/551409#M86226 sajiddalvi 2016-06-21T16:56:54Z Re: Programming eMMC on iMX6UL https://community.nxp.com/t5/i-MX-Processors/Programming-eMMC-on-iMX6UL/m-p/551410#M86227 <HTML><HEAD></HEAD><BODY><P><A class="jx-jive-macro-user" href="https://community.nxp.com/people/igorpadykov">igorpadykov</A> can you continue with this case?</P></BODY></HTML> Wed, 29 Jun 2016 15:29:26 GMT https://community.nxp.com/t5/i-MX-Processors/Programming-eMMC-on-iMX6UL/m-p/551410#M86227 karina_valencia 2016-06-29T15:29:26Z Re: Programming eMMC on iMX6UL https://community.nxp.com/t5/i-MX-Processors/Programming-eMMC-on-iMX6UL/m-p/551411#M86228 <HTML><HEAD></HEAD><BODY><P>suggest to rebuild mfg tools firmware using attached Yocto Guide</P><P>sect.6.2 Manufacturing Tool, MFGTool.</P></BODY></HTML> Wed, 29 Jun 2016 15:42:25 GMT https://community.nxp.com/t5/i-MX-Processors/Programming-eMMC-on-iMX6UL/m-p/551411#M86228 igorpadykov 2016-06-29T15:42:25Z