topic Re: Searching Target-Config-File for OpenOCD and IMX6QP (Plus!) in i.MX Processors

Searching Target-Config-File for OpenOCD and IMX6QP (Plus!)

martin_maurer — Wed, 27 Jul 2016 17:19:20 GMT

Hello,

has someone already used OpenOCD together with IMX6QP (or any other IMX6 "Plus" version)?

The IMX6QP has different IDs, I already adapted them. Do I need other changes?When doing a reset, it always tells me "How to reset?". How can I solve this?

I am using an Olimex ARM-USB-OCD-H and IMX6QP SABRE board, OpenOCD (0.9.0).

Best regards,

Martin

Re: Searching Target-Config-File for OpenOCD and IMX6QP (Plus!)

igorpadykov — Mon, 01 Aug 2016 23:31:03 GMT

Hi Martin

unfortunately I am not aware of OpenOCD configurations

working together with IMX6QP, it may be recommended to apply to

NXP Professional Services for developing it:

http://www.nxp.com/support/nxp-professional-services:PROFESSIONAL-SERVICE

Pro-Support contact www.nxp.com/prosupport

Best regards

igor

Re: Searching Target-Config-File for OpenOCD and IMX6QP (Plus!)

sinanakman — Tue, 02 Aug 2016 15:26:03 GMT

Hi Martin

You might also try posting your question to openocd mailing list or

ask at #openocd chat room. I had ordered the MCIMX6QP-SDB

board, when I receive I'll work on an openocd config.

Regards

Sinan Akman

Re: Searching Target-Config-File for OpenOCD and IMX6QP (Plus!)

prathamrahate — Mon, 19 Dec 2016 20:10:46 GMT

Hi Martin,

What are the JTAG ID you have used for i.MX6qp ?? I am also trying to connect openocd 0.8.0 to imx6qp board, but i am getting below error.

Error: JTAG scan chain interrogation failed: all zeroes
Error: Check JTAG interface, timings, target power, etc.
Error: Trying to use configured scan chain anyway...
Error: imx6.dap: IR capture error; saw 0x00 not 0x01
Warn : Bypassing JTAG setup events due to errors
Warn : Invalid ACK 0 in JTAG-DP transaction

Thanks,

Prathamesh Rahate.