Adding new MACHINE for new layer

aliismail — Sun, 24 Jul 2016 23:12:09 GMT

I am currently trying to add a new layer to my yocto build. After adding a new layer, it seems the build does not recognize the new machine I have added. I added the new_machine.conf to /conf/machine in the layer. I have added the layer to /conf/bblayers.conf. When I attempt to build the core image, I get the following notes/errors. It is somehow not aware of my machine.

Loaded 2574 entries from dependency cache.

NOTE: Resolving any missing task queue dependencies

NOTE: preferred version 3.14.52 of linux-imx not available (for item virtual/kernel)

NOTE: versions of linux-imx available: 3.14.28

NOTE: preferred version 3.14.52 of linux-imx not available (for item kernel-base)

NOTE: versions of linux-imx available: 3.14.28

NOTE: preferred version 3.14.52 of linux-imx not available (for item kernel-image)

NOTE: versions of linux-imx available: 3.14.28

I have tried adding COMPATIBLE_MACHINE_newMachine = newMachine, but this gives a large set of warning. Is there a config step I am missing to add a new machine to the build?

Re: Adding new MACHINE for new layer

jimmychan — Wed, 27 Jul 2016 04:18:02 GMT

seems the version of linux is not match. you can download the newer BSP to try again.

i.MX 6 Series Software and Development Tool|NXP

i.MX ProcessorsのトピックRe: Adding new MACHINE for new layer

Adding new MACHINE for new layer

Re: Adding new MACHINE for new layer