i.MX Processorsのトピックmx6q how to boot from sd4 https://community.nxp.com/t5/i-MX-Processors/mx6q-how-to-boot-from-sd4/m-p/520472#M84298 <HTML><HEAD></HEAD><BODY><P>自己公司设计的板子参照mx6qsabresd ，sd接口为SD4,那么怎么配置boot 从SD4启动呢，除来引脚配置还有其他的没？</P></BODY></HTML> Tue, 14 Jun 2016 10:06:28 GMT lixuhui112 2016-06-14T10:06:28Z mx6q how to boot from sd4 https://community.nxp.com/t5/i-MX-Processors/mx6q-how-to-boot-from-sd4/m-p/520472#M84298 <HTML><HEAD></HEAD><BODY><P>自己公司设计的板子参照mx6qsabresd ，sd接口为SD4,那么怎么配置boot 从SD4启动呢，除来引脚配置还有其他的没？</P></BODY></HTML> Tue, 14 Jun 2016 10:06:28 GMT https://community.nxp.com/t5/i-MX-Processors/mx6q-how-to-boot-from-sd4/m-p/520472#M84298 lixuhui112 2016-06-14T10:06:28Z Re: mx6q how to boot from sd4 https://community.nxp.com/t5/i-MX-Processors/mx6q-how-to-boot-from-sd4/m-p/520473#M84299 <HTML><HEAD></HEAD><BODY><P>Hi xuhui</P><P></P><P>please refer to sect.4.5.4 Booting from an SD card in slot SD4</P><P>attached Linux Guide. Software can be found on link</P><P><A href="http://www.nxp.com/products/microcontrollers-and-processors/arm-processors/i.mx-applications-processors/i.mx-6-processors/i.mx6qp/i.mx-6-series-software-and-development-tool-resources:IMX6_SW" title="http://www.nxp.com/products/microcontrollers-and-processors/arm-processors/i.mx-applications-processors/i.mx-6-processors/i.mx6qp/i.mx-6-series-software-and-development-tool-resources:IMX6_SW">i.MX 6 Series Software and Development Tool|NXP</A></P><P></P><P>Best regards</P><P>igor</P><P>-----------------------------------------------------------------------------------------------------------------------</P><P>Note: If this post answers your question, please click the Correct Answer button. Thank you!</P><P>-----------------------------------------------------------------------------------------------------------------------</P></BODY></HTML> Thu, 16 Jun 2016 01:37:55 GMT https://community.nxp.com/t5/i-MX-Processors/mx6q-how-to-boot-from-sd4/m-p/520473#M84299 igorpadykov 2016-06-16T01:37:55Z