topic Get boot source from user-space in i.MX Processors https://community.nxp.com/t5/i-MX-Processors/Get-boot-source-from-user-space/m-p/517896#M84104 <HTML><HEAD></HEAD><BODY><P>Hello!</P><P>I work with board on iMX6Quad CPU, board should boot from SD-card and eMMC-card and execute different programm.</P><P>How can I get in user-space boot source?</P><P>Thank you and excuse my bad english.</P></BODY></HTML> Thu, 09 Jun 2016 20:21:35 GMT BrilliantovKiri 2016-06-09T20:21:35Z Get boot source from user-space https://community.nxp.com/t5/i-MX-Processors/Get-boot-source-from-user-space/m-p/517896#M84104 <HTML><HEAD></HEAD><BODY><P>Hello!</P><P>I work with board on iMX6Quad CPU, board should boot from SD-card and eMMC-card and execute different programm.</P><P>How can I get in user-space boot source?</P><P>Thank you and excuse my bad english.</P></BODY></HTML> Thu, 09 Jun 2016 20:21:35 GMT https://community.nxp.com/t5/i-MX-Processors/Get-boot-source-from-user-space/m-p/517896#M84104 BrilliantovKiri 2016-06-09T20:21:35Z Re: Get boot source from user-space https://community.nxp.com/t5/i-MX-Processors/Get-boot-source-from-user-space/m-p/517897#M84105 <HTML><HEAD></HEAD><BODY><P>Hi Kirill</P><P></P><P>one can read from uboot SRC_SBMR1,2 registers</P><P>then perform necessary steps for booting.</P><P></P><P>Best regards</P><P>igor</P><P>-----------------------------------------------------------------------------------------------------------------------</P><P>Note: If this post answers your question, please click the Correct Answer button. Thank you!</P><P>-----------------------------------------------------------------------------------------------------------------------</P></BODY></HTML> Fri, 10 Jun 2016 00:41:38 GMT https://community.nxp.com/t5/i-MX-Processors/Get-boot-source-from-user-space/m-p/517897#M84105 igorpadykov 2016-06-10T00:41:38Z Re: Get boot source from user-space https://community.nxp.com/t5/i-MX-Processors/Get-boot-source-from-user-space/m-p/517898#M84106 <HTML><HEAD></HEAD><BODY><P>Thank you, Igor!</P><P>No, boot steps always one. I have to this information in user-space after linux boot, e.g. if system boot from SD-card I run script1.sh, but if from eMMC-card - run script2.sh.</P></BODY></HTML> Fri, 10 Jun 2016 07:01:32 GMT https://community.nxp.com/t5/i-MX-Processors/Get-boot-source-from-user-space/m-p/517898#M84106 BrilliantovKiri 2016-06-10T07:01:32Z