i.MX Processors中的主题 Re: i.MX233: System freeze after enabling CLKSEQ_BYPASS_CPU

i.MX233: System freeze after enabling CLKSEQ_BYPASS_CPU

lategoodbye — Fri, 06 May 2016 14:13:56 GMT

Hi,

want to reduce cpu frequency of the i.MX23 (LQFP 128 pin) to 24 MHz for standby. Unfortunately the Linux system (Kernel 4.5) freeze after enabling CLKCTRL_CLKSEQ_BYPASS_CPU.

Here a register dump before modifing CLKCTRL_CLKSEQ_BYPASS_CPU:

HW_CLKCTRL_HBUS   = 0x00000003
HW_CLKCTRL_CPU    = 0x00011001
HW_CLKCTRL_CLKSEQ = 0x0000011A
HW_CLKCTRL_EMI    = 0x00000102

What could be the reason for this behavior?

Re: i.MX233: System freeze after enabling CLKSEQ_BYPASS_CPU

Yuri — Tue, 10 May 2016 02:49:48 GMT

Hello,

What Linux is used in the case ?

NXP recent release is

https://www.nxp.com/webapp/Download?colCode=L2.6.31_10.05.00_SDK_SOURCE&appType=license&location=null&fpsp=1&WT_TYPE=Boa…

Perhaps it makes sense to post this issue to meta-fsl-arm mailing list,
since there is no official NXP release for kernel 4.5

https://lists.yoctoproject.org/listinfo/meta-freescale

Have a great day,
Yuri

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: i.MX233: System freeze after enabling CLKSEQ_BYPASS_CPU

lategoodbye — Tue, 10 May 2016 23:13:37 GMT

Hello Yuri,

it's the mainline kernel. I'm trying to port standby support to mainline.

I stuck on this line in my Linux 4.5 repo (which actually enabling CLKCTRL_CLKSEQ_BYPASS_CPU):

linux-2.6-imx.git - Freescale i.MX Linux Tree

This is my code:

linux-mxs-power/pm.c at rebase-4.5 · lategoodbye/linux-mxs-power · GitHub

I think my issue is related to a wrong or missing register settings which causes the freeze, because i don't get any debug output after this call.

Are there any constraints before enabling CLKCTRL_CLKSEQ_BYPASS_CPU?

Edit:

Do the code to switch BYPASS_CPU must run from OCRAM?

Do i take care of HBUS or XBUS clock setting?

Re: i.MX233: System freeze after enabling CLKSEQ_BYPASS_CPU

Yuri — Wed, 18 May 2016 07:11:53 GMT

Hello,

the following may be helpful :

linux-2.6.28.mx233-falconwing/sleep.S at master · xobs/linux-2.6.28.mx233-falconwing · GitHub

Regards,

Yuri.

Re: i.MX233: System freeze after enabling CLKSEQ_BYPASS_CPU

lategoodbye — Wed, 18 May 2016 19:51:02 GMT

Hi Yuri,

i added debug messages after each instruction. The issue appears before entering the suspend function in OCRAM, directly after:

if (clk_set_parent(cpu_clk, osc_clk) < 0) {

I will try to move this code into OCRAM.

Re: i.MX233: System freeze after enabling CLKSEQ_BYPASS_CPU

lategoodbye — Fri, 03 Jun 2016 16:47:22 GMT

I moved code for the clock switching in OCRAM, but it shows the same behavior.

Then i did the same in U-Boot which leads to Data abort R14 and a bootloop.

I also tried the Freescale Kernel 2.6.35 which also show no reaction to resume.

Btw here is the naming of the i.MX233:

MCIMX233CAG4C

A5 M88S

XAA1132A