i.MX ProcessorsのトピックRe: How to modify code and then build image? https://community.nxp.com/t5/i-MX-Processors/How-to-modify-code-and-then-build-image/m-p/503152#M81491 <HTML><HEAD></HEAD><BODY><P>Hi Bob,</P><P>You can refer to the i.MX_BSP_Porting_Guide.pdf in our website.<BR />Have a great day,<BR />Dan</P><P></P><P>-----------------------------------------------------------------------------------------------------------------------<BR />Note: If this post answers your question, please click the Mark Correct button. Thank you!<BR />-----------------------------------------------------------------------------------------------------------------------</P></BODY></HTML> Fri, 25 Mar 2016 09:32:05 GMT Rita_Wang 2016-03-25T09:32:05Z How to modify code and then build image? https://community.nxp.com/t5/i-MX-Processors/How-to-modify-code-and-then-build-image/m-p/503151#M81490 <HTML><HEAD></HEAD><BODY><P>Hi,all:<BR />&nbsp;&nbsp;&nbsp;&nbsp; I am a new user for iMX6ULEVK,I knew using bitbake to build image now and build successfully,but I don't kown how and where modify the source code.For exmple,I want to run a HelloWorld in the broad.Where to edit the code? And how to build this image after modification? Is there any document including those?</P></BODY></HTML> Fri, 25 Mar 2016 06:54:19 GMT https://community.nxp.com/t5/i-MX-Processors/How-to-modify-code-and-then-build-image/m-p/503151#M81490 bobking 2016-03-25T06:54:19Z Re: How to modify code and then build image? https://community.nxp.com/t5/i-MX-Processors/How-to-modify-code-and-then-build-image/m-p/503152#M81491 <HTML><HEAD></HEAD><BODY><P>Hi Bob,</P><P>You can refer to the i.MX_BSP_Porting_Guide.pdf in our website.<BR />Have a great day,<BR />Dan</P><P></P><P>-----------------------------------------------------------------------------------------------------------------------<BR />Note: If this post answers your question, please click the Mark Correct button. Thank you!<BR />-----------------------------------------------------------------------------------------------------------------------</P></BODY></HTML> Fri, 25 Mar 2016 09:32:05 GMT https://community.nxp.com/t5/i-MX-Processors/How-to-modify-code-and-then-build-image/m-p/503152#M81491 Rita_Wang 2016-03-25T09:32:05Z