MCIMX6QP-SDB schematic not found

stefanmattes — Wed, 13 Apr 2016 15:17:14 GMT

we got the SABRE Board MCIMX6QP-SDB from our distributor for testing Android by using the Qplus controller. The board only has one OTG USB on board, the HOST USB is not available. We want activate the USB Host connector and had to add some components.

The problem is, there is no schematic available on the support site for this board, for SABRE Smart Device Board only.

Please could you post the link to the schematic for MCIMX6QP-SDB.

Thanks in advance

Re: MCIMX6QP-SDB schematic not found

igorpadykov — Thu, 14 Apr 2016 00:40:33 GMT

Hi Stefan

i.MX6QP SDB schematic can be found on

Schematics (3)

Design files, including hardware schematics, Gerbers, and OrCAD files

for i.MX 6QuadPlus (i.MX 6DualPlus emulation) (REV 1)

http://www.nxp.com/products/microcontrollers-and-processors/arm-processors/i.mx-applications-processors-based-on-arm-cores/i.mx-6-processors/i.mx6qp/sabre-board-for-smart-devices-reference-design-based-on-the-i.mx-6-series:RDIMX6SABREBRD?fpsp=1&tab=Design_Tools_Tab

Best regards

igor

-----------------------------------------------------------------------------------------------------------------------

Note: If this post answers your question, please click the Correct Answer button. Thank you!

-----------------------------------------------------------------------------------------------------------------------

i.MX ProcessorsのトピックRe: MCIMX6QP-SDB schematic not found

MCIMX6QP-SDB schematic not found

Re: MCIMX6QP-SDB schematic not found