topic Re: librtmp and openssl with hardware caam in i.MX Processors https://community.nxp.com/t5/i-MX-Processors/librtmp-and-openssl-with-hardware-caam/m-p/501422#M81160 <HTML><HEAD></HEAD><BODY><P>Hi veeranjaneyulu</P><P></P><P>I am not aware of usage caam with librtmp, but in general</P><P>attached Linux Manual Chapter 50 CAAM describes caam</P><P>integration of Crypto APIs. For openssl one can look at</P><P><A href="https://community.nxp.com/thread/309499">CAAM test application for iMX6</A></P><P></P><P>Best regards</P><P>igor</P><P>-----------------------------------------------------------------------------------------------------------------------</P><P>Note: If this post answers your question, please click the Correct Answer button. Thank you!</P><P>-----------------------------------------------------------------------------------------------------------------------</P></BODY></HTML> Fri, 06 May 2016 00:40:49 GMT igorpadykov 2016-05-06T00:40:49Z librtmp and openssl with hardware caam https://community.nxp.com/t5/i-MX-Processors/librtmp-and-openssl-with-hardware-caam/m-p/501421#M81159 <HTML><HEAD></HEAD><BODY><P>Hi all,</P><P></P><P>we used librtmp ,rtmpdump,openssl ,crypto-modules for hardware caam with video streaming purpose .we are using linux kernel 3.14.28 with yocto setup .is it support hardware caam?.how to add hardware caam engine support in librtmp source?.Is any body tried ?</P><P>Flow mentioned below</P><P>libgstrtmp===&gt;librtmp===&gt;openssl====&gt;cryptodev====&gt;caam</P><P></P><P></P><P>Thanks &amp; Regards</P><P>veeranjaneyulu</P></BODY></HTML> Thu, 05 May 2016 08:30:15 GMT https://community.nxp.com/t5/i-MX-Processors/librtmp-and-openssl-with-hardware-caam/m-p/501421#M81159 veeranjaneyulug 2016-05-05T08:30:15Z Re: librtmp and openssl with hardware caam https://community.nxp.com/t5/i-MX-Processors/librtmp-and-openssl-with-hardware-caam/m-p/501422#M81160 <HTML><HEAD></HEAD><BODY><P>Hi veeranjaneyulu</P><P></P><P>I am not aware of usage caam with librtmp, but in general</P><P>attached Linux Manual Chapter 50 CAAM describes caam</P><P>integration of Crypto APIs. For openssl one can look at</P><P><A href="https://community.nxp.com/thread/309499">CAAM test application for iMX6</A></P><P></P><P>Best regards</P><P>igor</P><P>-----------------------------------------------------------------------------------------------------------------------</P><P>Note: If this post answers your question, please click the Correct Answer button. Thank you!</P><P>-----------------------------------------------------------------------------------------------------------------------</P></BODY></HTML> Fri, 06 May 2016 00:40:49 GMT https://community.nxp.com/t5/i-MX-Processors/librtmp-and-openssl-with-hardware-caam/m-p/501422#M81160 igorpadykov 2016-05-06T00:40:49Z