Sabre SD board DDR3 Address timing

sparkyee — Tue, 01 Mar 2016 18:44:13 GMT

Hi,

Does anyone know if the Sabre for smart Devices reference board was designed

for 1T or 2T DDR3 Address Timing? I am trying to do a Hyperlynx simulation of the

board and need to know how to setup the timing. Any help is appreciated!

Thanks!

Larry

Re: Sabre SD board DDR3 Address timing

Yuri — Wed, 02 Mar 2016 05:30:55 GMT

Hello,

There is no special mode for the 2T ; all timing parameters may be configured via MMDC registers, no more.

For more detailed configuring, please use the following tool.

i.MX6DQ SABRE SDP/B DDR3 Register Programming Aid

Have a great day,
Yuri

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

i.MX ProcessorsのトピックSabre SD board DDR3 Address timing

Sabre SD board DDR3 Address timing

Re: Sabre SD board DDR3 Address timing