topic Re: 关于Android5.1.1在6DL上的烧写（非原装板） in i.MX Processors

topic Re: 关于Android5.1.1在6DL上的烧写（非原装板） in i.MX Processors https://community.nxp.com/t5/i-MX-Processors/%E5%85%B3%E4%BA%8EAndroid5-1-1%E5%9C%A86DL%E4%B8%8A%E7%9A%84%E7%83%A7%E5%86%99-%E9%9D%9E%E5%8E%9F%E8%A3%85%E6%9D%BF/m-p/497446#M80137 <HTML><HEAD></HEAD><BODY><P>你好</P><P>我怀疑是mfgtool中uboot的问题，</P><P>但是怎么才能得到firmware下的u-boot-imx6dlsabresd_sd.imx？</P><P></P><P>在4.2.2的时候，可以在uboot下执行如下命令得到：</P><P>make distclean</P><P>make mx6dl_sabresd_mfg_config</P><P>make</P><P>但是现在不再适用了</P></BODY></HTML> Tue, 26 Jan 2016 08:45:37 GMT jiangshao 2016-01-26T08:45:37Z 关于Android5.1.1在6DL上的烧写（非原装板） https://community.nxp.com/t5/i-MX-Processors/%E5%85%B3%E4%BA%8EAndroid5-1-1%E5%9C%A86DL%E4%B8%8A%E7%9A%84%E7%83%A7%E5%86%99-%E9%9D%9E%E5%8E%9F%E8%A3%85%E6%9D%BF/m-p/497434#M80125 <HTML><HEAD></HEAD><BODY><P>各位尊敬的FAE</P><P></P><P>以前我问过类似的问题，是关于5.0的烧写。</P><P>当时发现如果修改对应的vbs，加上-ldo参数，即可顺利烧写Android5.0并启动。</P><P>（只是boot和recovery的文件名要去掉ldo）</P><P></P><P>这次我下载了5.1专用的mfgtools准备烧写5.1.1，</P><P>并按照之前5.0的做法，修改对应的vbs，加上-ldo参数。</P><P>根据ucl2.xml，没有去掉boot和recovery文件名中的ldo。</P><P></P><P>mfgtools可以启动，</P><P><SPAN style="font-family: 宋体;">但是烧写到</SPAN>Jumping to OS image.</P><P><SPAN style="font-family: 宋体;">时，烧写停止，串口输出如下内容：</SPAN></P><P></P><P>U-Boot 2015.04-imx_v2015.04_3.14.52_1.1.0_ga+g53e6f33 (Nov 01 2015 - 14:00:23)</P><P></P><P>CPU: Freescale i.MX6DL rev1.1 at 792 MHz</P><P>CPU: Temperature 46 C</P><P>Reset cause: POR</P><P>Board: MX6-SabreSD</P><P>I2C: ready</P><P>DRAM: 1 GiB</P><P><SPAN lang="EN-US" style="color: red;">Can't find PMIC:PFUZE100</SPAN></P><P><SPAN lang="EN-US" style="color: red;">initcall sequence 4ff93250 failed at call 17803664 (err=-19)</SPAN></P><P>  <SPAN lang="EN-US" style="font-size: 10.5pt; font-family: 'Calibri','sans-serif'; color: red;">### ERROR ### Please RESET the board ###</SPAN></P><P></P><P>mfgtools的log如下：</P><P>DLL version: 2.6.2</P><P>Tuesday, January 19, 2016 10:10:32   Start new logging</P><P>ModuleID[2] LevelID[10]: CMyExceptionHandler thread is running</P><P>ModuleID[2] LevelID[1]: new MxHidDeviceClass</P><P>ModuleID[2] LevelID[10]: new MxHidDevice[00673A28]</P><P>ModuleID[2] LevelID[1]: new MxHidDeviceClass</P><P>ModuleID[2] LevelID[10]: new MxHidDevice[00673EF8]</P><P>ModuleID[2] LevelID[1]: new MxHidDeviceClass</P><P>ModuleID[2] LevelID[10]: new MxHidDevice[04179458]</P><P>ModuleID[2] LevelID[1]: new MxHidDeviceClass</P><P>ModuleID[2] LevelID[10]: new MxHidDevice[04179050]</P><P>ModuleID[2] LevelID[1]: new MxHidDeviceClass</P><P>ModuleID[2] LevelID[10]: new MxHidDevice[03FED700]</P><P>ModuleID[2] LevelID[1]: new MxHidDeviceClass</P><P>ModuleID[2] LevelID[10]: new MxHidDevice[03FEDBD0]</P><P>ModuleID[2] LevelID[10]: Device Manager thread is running</P><P>ModuleID[2] LevelID[1]: Can't set m_hStopEvent before it initialized or it already stop</P><P></P><P>ModuleID[2] LevelID[10]: CmdOperation[0] device chagned and reset to state 0</P><P>ModuleID[2] LevelID[10]: CmdOperation[0], skip current command, so SetEvent(hDevCanDeleteEvent)</P><P>ModuleID[2] LevelID[10]: ExecuteCommand--Boot[WndIndex:0], File is E:\mfgtools51\Profiles\linux\OS Firmware\firmware\u-boot-imx6dlsabresd_sd.imx</P><P>ModuleID[2] LevelID[10]: ExecuteCommand--Load[WndIndex:0], File is E:\mfgtools51\Profiles\linux\OS Firmware\firmware\zImage, address is 0x12000000</P><P>ModuleID[2] LevelID[10]: PortMgrDlg(0)--Command Load excute successfully, retry count: 0</P><P>ModuleID[2] LevelID[10]: ExecuteCommand--Load[WndIndex:0], File is E:\mfgtools51\Profiles\linux\OS Firmware\firmware\fsl-image-mfgtool-initramfs-imx_mfgtools.cpio.gz.u-boot, address is 0x12C00000</P><P>ModuleID[2] LevelID[10]: PortMgrDlg(0)--Command Load excute successfully, retry count: 0</P><P>ModuleID[2] LevelID[10]: CmdOperation[0], skip current command, so SetEvent(hDevCanDeleteEvent)</P><P>ModuleID[2] LevelID[10]: ExecuteCommand--Load[WndIndex:0], File is E:\mfgtools51\Profiles\linux\OS Firmware\firmware\zImage-imx6dl-sabresd-ldo.dtb, address is 0x18000000</P><P>ModuleID[2] LevelID[10]: PortMgrDlg(0)--Command Load excute successfully, retry count: 0</P><P>ModuleID[2] LevelID[10]: ExecuteCommand--Jump[WndIndex:0]</P><P>ModuleID[2] LevelID[10]: *********MxHidDevice[03FEDBD0] Jump to Ramkernel successfully!**********</P><P>ModuleID[2] LevelID[10]: CmdOperation[0], current state command has been finished and the last command is successful, so SetEvent(hDevCanDeleteEvent)</P><P>ModuleID[2] LevelID[10]: CmdOperation[0] device chagned and reset to state 0</P><P>ModuleID[2] LevelID[10]: CmdOperation[0], skip current command, so SetEvent(hDevCanDeleteEvent)</P><P>ModuleID[2] LevelID[10]: ExecuteCommand--Boot[WndIndex:0], File is E:\mfgtools51\Profiles\linux\OS Firmware\firmware\u-boot-imx6dlsabresd_sd.imx</P><P><SPAN style="color: #e23d39;">ModuleID[2] LevelID[1]: MxHidDevice::Write() Error writing to device 0x79.</SPAN></P><P><SPAN lang="EN-US" style="color: red;">ModuleID[2] LevelID[1]: Failed to initialize memory!</SPAN></P><P><SPAN lang="EN-US" style="color: red;">ModuleID[2] LevelID[1]: PortMgrDlg(0)--MxHidDevice--Command Boot excute failed</SPAN></P><P>ModuleID[2] LevelID[10]: CmdOperation[0], current command executed failed, so SetEvent(hDevCanDeleteEvent)</P><P>ModuleID[2] LevelID[10]: CCmdOpreation[0] thread is Closed</P><P>ModuleID[2] LevelID[10]: CCmdOpreation[0] thread is Closed</P><P>ModuleID[2] LevelID[10]: DeviceManager::OnMsgDeviceEvent() - EVENT_KILL</P><P>ModuleID[2] LevelID[10]: CMyExceptionHandler::OnMsgExceptionEvent() - KillExceptionHandlerThread</P><P>ModuleID[2] LevelID[10]: Exception Handler thread is closed</P><P>ModuleID[2] LevelID[1]: delete MxHidDeviceClass</P><P>ModuleID[2] LevelID[10]: delete MxHidDevice[03FEDBD0]</P><P>  <SPAN lang="EN-US" style="font-size: 10.5pt; font-family: 'Calibri','sans-serif';">ModuleID[2] LevelID[10]: Device Manager thread is closed</SPAN></P><P></P><P>我试着</P><P>1，替换之前5.0的uboot</P><P>2，全部替换成5.0的四个img文件</P><P>均没有改善，错误依旧</P><P></P><P>有人知道为什么吗？该如何修改？</P></BODY></HTML> Tue, 19 Jan 2016 03:05:04 GMT https://community.nxp.com/t5/i-MX-Processors/%E5%85%B3%E4%BA%8EAndroid5-1-1%E5%9C%A86DL%E4%B8%8A%E7%9A%84%E7%83%A7%E5%86%99-%E9%9D%9E%E5%8E%9F%E8%A3%85%E6%9D%BF/m-p/497434#M80125 jiangshao 2016-01-19T03:05:04Z Re: 关于Android5.1.1在6DL上的烧写（非原装板） https://community.nxp.com/t5/i-MX-Processors/%E5%85%B3%E4%BA%8EAndroid5-1-1%E5%9C%A86DL%E4%B8%8A%E7%9A%84%E7%83%A7%E5%86%99-%E9%9D%9E%E5%8E%9F%E8%A3%85%E6%9D%BF/m-p/497435#M80126 <HTML><HEAD></HEAD><BODY><P>Hi jiang,</P><P>Here I want to know which board are you using, the board you buy from our company or you design yourself? Besides, which flash are you download the images to, the SD card or EMMC?<BR />Have a great day,<BR />Dan</P><P>-----------------------------------------------------------------------------------------------------------------------<BR />Note: If this post answers your question, please click the Correct Answer button. Thank you!<BR />-----------------------------------------------------------------------------------------------------------------------</P></BODY></HTML> Tue, 19 Jan 2016 03:48:19 GMT https://community.nxp.com/t5/i-MX-Processors/%E5%85%B3%E4%BA%8EAndroid5-1-1%E5%9C%A86DL%E4%B8%8A%E7%9A%84%E7%83%A7%E5%86%99-%E9%9D%9E%E5%8E%9F%E8%A3%85%E6%9D%BF/m-p/497435#M80126 Rita_Wang 2016-01-19T03:48:19Z Re: 关于Android5.1.1在6DL上的烧写（非原装板） https://community.nxp.com/t5/i-MX-Processors/%E5%85%B3%E4%BA%8EAndroid5-1-1%E5%9C%A86DL%E4%B8%8A%E7%9A%84%E7%83%A7%E5%86%99-%E9%9D%9E%E5%8E%9F%E8%A3%85%E6%9D%BF/m-p/497436#M80127 <HTML><HEAD></HEAD><BODY><P>您好，使用是自己设计的sabresd 6dl，不是飞思卡尔原装板。</P><P>烧写是烧写到emmc中。</P><P></P><P>另：之前5.0是可以正常烧写，启动的。这是打算烧写5.1.1，没有成功</P></BODY></HTML> Tue, 19 Jan 2016 04:48:09 GMT https://community.nxp.com/t5/i-MX-Processors/%E5%85%B3%E4%BA%8EAndroid5-1-1%E5%9C%A86DL%E4%B8%8A%E7%9A%84%E7%83%A7%E5%86%99-%E9%9D%9E%E5%8E%9F%E8%A3%85%E6%9D%BF/m-p/497436#M80127 jiangshao 2016-01-19T04:48:09Z Re: 关于Android5.1.1在6DL上的烧写（非原装板） https://community.nxp.com/t5/i-MX-Processors/%E5%85%B3%E4%BA%8EAndroid5-1-1%E5%9C%A86DL%E4%B8%8A%E7%9A%84%E7%83%A7%E5%86%99-%E9%9D%9E%E5%8E%9F%E8%A3%85%E6%9D%BF/m-p/497437#M80128 <HTML><HEAD></HEAD><BODY><P>Hi Jiang,</P><P>你这里烧写的images是你自己编译过的， android5.1.1你也移植OK，编译好的对么？</P><P>Best Regards</P><P>Dan</P></BODY></HTML> Tue, 19 Jan 2016 05:44:10 GMT https://community.nxp.com/t5/i-MX-Processors/%E5%85%B3%E4%BA%8EAndroid5-1-1%E5%9C%A86DL%E4%B8%8A%E7%9A%84%E7%83%A7%E5%86%99-%E9%9D%9E%E5%8E%9F%E8%A3%85%E6%9D%BF/m-p/497437#M80128 Rita_Wang 2016-01-19T05:44:10Z Re: 关于Android5.1.1在6DL上的烧写（非原装板） https://community.nxp.com/t5/i-MX-Processors/%E5%85%B3%E4%BA%8EAndroid5-1-1%E5%9C%A86DL%E4%B8%8A%E7%9A%84%E7%83%A7%E5%86%99-%E9%9D%9E%E5%8E%9F%E8%A3%85%E6%9D%BF/m-p/497438#M80129 <HTML><HEAD></HEAD><BODY><P>是的，5.0和5.1.1都是从飞思卡尔官网下载源码，自己编译得到的image。</P><P></P><P>5.0和5.1.1，都是修改BoardConfig.mk，得到</P><P>boot-imx6dl-ldo.img</P><P>recovery-imx6dl-ldo.img</P><P>system.img</P><P>u-boot-imx6dl.imx</P><P></P><P>然后修改mfgtool2-android-mx6dl-sabresd-emmc.vbs</P><P>增加-ldo参数</P><P></P><P>5.0去掉以下两个文件名中的-ldo，可以烧写，启动</P><P>boot-imx6dl-ldo.img</P><P>recovery-imx6dl-ldo.img</P><P></P><P>5.1.1不用去掉文件名中的-ldo，烧写途中出现上述错误</P></BODY></HTML> Tue, 19 Jan 2016 06:21:32 GMT https://community.nxp.com/t5/i-MX-Processors/%E5%85%B3%E4%BA%8EAndroid5-1-1%E5%9C%A86DL%E4%B8%8A%E7%9A%84%E7%83%A7%E5%86%99-%E9%9D%9E%E5%8E%9F%E8%A3%85%E6%9D%BF/m-p/497438#M80129 jiangshao 2016-01-19T06:21:32Z Re: 关于Android5.1.1在6DL上的烧写（非原装板） https://community.nxp.com/t5/i-MX-Processors/%E5%85%B3%E4%BA%8EAndroid5-1-1%E5%9C%A86DL%E4%B8%8A%E7%9A%84%E7%83%A7%E5%86%99-%E9%9D%9E%E5%8E%9F%E8%A3%85%E6%9D%BF/m-p/497439#M80130 <HTML><HEAD></HEAD><BODY><P>Hi Jiang,</P><P>你这里使用android5.1.1版本的BSP的话，烧写的时候，也是要将-ldo去掉的。而且你要使用官网提供的IMX6_L5.1_2.1.0_MFG_TOOL.tar.gz版本的MFGTOOL来烧写。<BR />Have a great day,<BR />Dan</P><P>-----------------------------------------------------------------------------------------------------------------------<BR />Note: If this post answers your question, please click the Correct Answer button. Thank you!<BR />-----------------------------------------------------------------------------------------------------------------------</P></BODY></HTML> Tue, 19 Jan 2016 08:32:35 GMT https://community.nxp.com/t5/i-MX-Processors/%E5%85%B3%E4%BA%8EAndroid5-1-1%E5%9C%A86DL%E4%B8%8A%E7%9A%84%E7%83%A7%E5%86%99-%E9%9D%9E%E5%8E%9F%E8%A3%85%E6%9D%BF/m-p/497439#M80130 Rita_Wang 2016-01-19T08:32:35Z Re: 关于Android5.1.1在6DL上的烧写（非原装板） https://community.nxp.com/t5/i-MX-Processors/%E5%85%B3%E4%BA%8EAndroid5-1-1%E5%9C%A86DL%E4%B8%8A%E7%9A%84%E7%83%A7%E5%86%99-%E9%9D%9E%E5%8E%9F%E8%A3%85%E6%9D%BF/m-p/497440#M80131 <HTML><HEAD></HEAD><BODY><P>感谢回答</P><P></P><P>首先，我在烧写5.1.1的时候使用的就是<SPAN style="color: #51626f; font-family: arial, helvetica, 'helvetica neue', verdana, sans-serif;">官网提供的IMX6_L5.1_2.1.0_MFG_TOOL.tar.gz</SPAN></P><P></P><P><SPAN style="color: #51626f; font-family: arial, helvetica, 'helvetica neue', verdana, sans-serif;">您所说的<SPAN style="color: #51626f; font-family: arial, helvetica, 'helvetica neue', verdana, sans-serif;">要将-ldo去掉，是指img的文件名要去掉-ldo吗？</SPAN></SPAN></P><P><SPAN style="color: #51626f; font-family: arial, helvetica, 'helvetica neue', verdana, sans-serif;">那样的话会出错的，因为ucl2.xml来看，若vbs中指定了-ldo参数，它就会去寻找</SPAN></P><P><SPAN style="color: #51626f; font-family: arial, helvetica, 'helvetica neue', verdana, sans-serif;">带-ldo的文件</SPAN></P><P></P><P><SPAN style="color: #51626f; font-family: arial, helvetica, 'helvetica neue', verdana, sans-serif;"><LIST name="eMMC-Android" desc="Choose eMMC as media"></SPAN></P><P><SPAN style="color: #51626f; font-family: arial, helvetica, 'helvetica neue', verdana, sans-serif;">：</SPAN></P><P><SPAN style="color: #51626f; font-family: arial, helvetica, 'helvetica neue', verdana, sans-serif;"><CMD state="Updater" type="push" body="send" file="files/android/%folder%/boot-imx%soc%%plus%%ldo%.img" >Sending and writting boot.img</CMD></SPAN></P><P><SPAN style="color: #51626f; font-family: arial, helvetica, 'helvetica neue', verdana, sans-serif;">：</SPAN></P><P><SPAN style="color: #51626f; font-family: arial, helvetica, 'helvetica neue', verdana, sans-serif;"><CMD state="Updater" type="push" body="pipe dd of=/dev/mmcblk%mmc%p2 bs=512" file="files/android/%folder%/recovery-imx%soc%%plus%%ldo%.img">Sending and writting recovery.img</CMD></SPAN></P><P><SPAN style="color: #51626f; font-family: arial, helvetica, 'helvetica neue', verdana, sans-serif;">：</SPAN></P></BODY></HTML> Tue, 19 Jan 2016 09:15:34 GMT https://community.nxp.com/t5/i-MX-Processors/%E5%85%B3%E4%BA%8EAndroid5-1-1%E5%9C%A86DL%E4%B8%8A%E7%9A%84%E7%83%A7%E5%86%99-%E9%9D%9E%E5%8E%9F%E8%A3%85%E6%9D%BF/m-p/497440#M80131 jiangshao 2016-01-19T09:15:34Z Re: 关于Android5.1.1在6DL上的烧写（非原装板） https://community.nxp.com/t5/i-MX-Processors/%E5%85%B3%E4%BA%8EAndroid5-1-1%E5%9C%A86DL%E4%B8%8A%E7%9A%84%E7%83%A7%E5%86%99-%E9%9D%9E%E5%8E%9F%E8%A3%85%E6%9D%BF/m-p/497441#M80132 <HTML><HEAD></HEAD><BODY><P>Hi Jiang,</P><P>是images文件中的ldo去掉。要不这样吧，我明天在我的板子上试一下。android5.1我这边还没有跑过。明天我试完了给你回复哈。</P><P>Have a great day,</P><P>Dan</P></BODY></HTML> Tue, 19 Jan 2016 09:34:29 GMT https://community.nxp.com/t5/i-MX-Processors/%E5%85%B3%E4%BA%8EAndroid5-1-1%E5%9C%A86DL%E4%B8%8A%E7%9A%84%E7%83%A7%E5%86%99-%E9%9D%9E%E5%8E%9F%E8%A3%85%E6%9D%BF/m-p/497441#M80132 Rita_Wang 2016-01-19T09:34:29Z Re: 关于Android5.1.1在6DL上的烧写（非原装板） https://community.nxp.com/t5/i-MX-Processors/%E5%85%B3%E4%BA%8EAndroid5-1-1%E5%9C%A86DL%E4%B8%8A%E7%9A%84%E7%83%A7%E5%86%99-%E9%9D%9E%E5%8E%9F%E8%A3%85%E6%9D%BF/m-p/497442#M80133 <HTML><HEAD></HEAD><BODY><P>您好</P><P>请问，测试有结论了吗？</P></BODY></HTML> Thu, 21 Jan 2016 05:50:26 GMT https://community.nxp.com/t5/i-MX-Processors/%E5%85%B3%E4%BA%8EAndroid5-1-1%E5%9C%A86DL%E4%B8%8A%E7%9A%84%E7%83%A7%E5%86%99-%E9%9D%9E%E5%8E%9F%E8%A3%85%E6%9D%BF/m-p/497442#M80133 jiangshao 2016-01-21T05:50:26Z Re: 关于Android5.1.1在6DL上的烧写（非原装板） https://community.nxp.com/t5/i-MX-Processors/%E5%85%B3%E4%BA%8EAndroid5-1-1%E5%9C%A86DL%E4%B8%8A%E7%9A%84%E7%83%A7%E5%86%99-%E9%9D%9E%E5%8E%9F%E8%A3%85%E6%9D%BF/m-p/497443#M80134 <HTML><HEAD></HEAD><BODY><P>Hello,</P><P>不好意思啊，今天才把源码下载完，明天一定给你回复。</P><P>Have a great day,</P><P>Dan</P></BODY></HTML> Thu, 21 Jan 2016 08:43:16 GMT https://community.nxp.com/t5/i-MX-Processors/%E5%85%B3%E4%BA%8EAndroid5-1-1%E5%9C%A86DL%E4%B8%8A%E7%9A%84%E7%83%A7%E5%86%99-%E9%9D%9E%E5%8E%9F%E8%A3%85%E6%9D%BF/m-p/497443#M80134 Rita_Wang 2016-01-21T08:43:16Z Re: 关于Android5.1.1在6DL上的烧写（非原装板） https://community.nxp.com/t5/i-MX-Processors/%E5%85%B3%E4%BA%8EAndroid5-1-1%E5%9C%A86DL%E4%B8%8A%E7%9A%84%E7%83%A7%E5%86%99-%E9%9D%9E%E5%8E%9F%E8%A3%85%E6%9D%BF/m-p/497444#M80135 <HTML><HEAD></HEAD><BODY><P>Hello Jiang,</P><P>我这边试过了，我烧写的是</P><P>u-boot-imx6dl.imx</P><P>boot-imx6dl.img</P><P>recovery-imx6dl.img</P><P>system.img</P><P>是不用带 ‘-ldo’ 的，你这里写到emmc上使用的是 mfgtool2-android-mx6dl-sabresd-emmc.vbs</P><P>你这里通过Edit该脚本，你可以看到该脚本里烧写配置是：</P><P>Set wshShell = CreateObject("WScript.shell")</P><P>wshShell.run "mfgtool2.exe -c ""linux"" -l ""eMMC-Android"" -s ""board=sabresd"" -s ""folder=sabresd"" -s ""soc=6dl"" -s ""mmc=3"" -s ""data_type="""</P><P>Set wshShell = Nothing</P><P>是没有‘-ldo’的设置的。</P><P>新版本的mfgtool工具是把所有系列都放在一起，不是单独的，有的产品是需要的，有的不需要。需要的话，烧写的时候配置与一下就OK的了。不需要就不需要设置的。</P><P>你再试一下，有问题的话我们再沟通。<BR />Have a great day,<BR />Dan</P><P></P><P>-----------------------------------------------------------------------------------------------------------------------<BR />Note: If this post answers your question, please click the Correct Answer button. Thank you!<BR />-----------------------------------------------------------------------------------------------------------------------</P></BODY></HTML> Fri, 22 Jan 2016 07:01:29 GMT https://community.nxp.com/t5/i-MX-Processors/%E5%85%B3%E4%BA%8EAndroid5-1-1%E5%9C%A86DL%E4%B8%8A%E7%9A%84%E7%83%A7%E5%86%99-%E9%9D%9E%E5%8E%9F%E8%A3%85%E6%9D%BF/m-p/497444#M80135 Rita_Wang 2016-01-22T07:01:29Z Re: 关于Android5.1.1在6DL上的烧写（非原装板） https://community.nxp.com/t5/i-MX-Processors/%E5%85%B3%E4%BA%8EAndroid5-1-1%E5%9C%A86DL%E4%B8%8A%E7%9A%84%E7%83%A7%E5%86%99-%E9%9D%9E%E5%8E%9F%E8%A3%85%E6%9D%BF/m-p/497445#M80136 <HTML><HEAD></HEAD><BODY><P>你好，感谢回答。</P><P></P><P>我根据之前Android5.0的经验，认为我们需要在<SPAN style="color: #51626f; font-family: arial, helvetica, 'helvetica neue', verdana, sans-serif;">mfgtool2-android-mx6dl-sabresd-emmc.vbs中追加-ldo，</SPAN></P><P><SPAN style="color: #51626f; font-family: arial, helvetica, 'helvetica neue', verdana, sans-serif;">但是遗憾的是无法烧写。</SPAN></P><P></P><P><SPAN style="color: #51626f; font-family: arial, helvetica, 'helvetica neue', verdana, sans-serif;">而且我还试着不修改mfgtool（也就是不加-ldo），烧写以下文件，也是相同的错误。。。</SPAN></P><P style="font-family: arial, helvetica, 'helvetica neue', verdana, sans-serif; color: #51626f;">u-boot-imx6dl.imx</P><P style="font-family: arial, helvetica, 'helvetica neue', verdana, sans-serif; color: #51626f;">boot-imx6dl.img</P><P style="font-family: arial, helvetica, 'helvetica neue', verdana, sans-serif; color: #51626f;">recovery-imx6dl.img</P><P style="font-family: arial, helvetica, 'helvetica neue', verdana, sans-serif; color: #51626f;">system.img</P><P></P><P>还试着使用当初编译Android5.0得到的<SPAN style="color: #51626f; font-family: arial, helvetica, 'helvetica neue', verdana, sans-serif;">u-boot-imx6dl.imx，也是相同错误。</SPAN></P><P><SPAN style="color: #51626f; font-family: arial, helvetica, 'helvetica neue', verdana, sans-serif;">甚至把4个img文件都替换成Android5.0的，<SPAN style="color: #51626f; font-family: arial, helvetica, 'helvetica neue', verdana, sans-serif;">也是相同错误。</SPAN></SPAN></P><P><SPAN style="color: #51626f; font-family: arial, helvetica, 'helvetica neue', verdana, sans-serif;"> </SPAN></P><P><SPAN style="color: #51626f; font-family: arial, helvetica, 'helvetica neue', verdana, sans-serif;">所以才怀疑是不是mfgtool的问题</SPAN></P></BODY></HTML> Fri, 22 Jan 2016 07:59:03 GMT https://community.nxp.com/t5/i-MX-Processors/%E5%85%B3%E4%BA%8EAndroid5-1-1%E5%9C%A86DL%E4%B8%8A%E7%9A%84%E7%83%A7%E5%86%99-%E9%9D%9E%E5%8E%9F%E8%A3%85%E6%9D%BF/m-p/497445#M80136 jiangshao 2016-01-22T07:59:03Z Re: 关于Android5.1.1在6DL上的烧写（非原装板） https://community.nxp.com/t5/i-MX-Processors/%E5%85%B3%E4%BA%8EAndroid5-1-1%E5%9C%A86DL%E4%B8%8A%E7%9A%84%E7%83%A7%E5%86%99-%E9%9D%9E%E5%8E%9F%E8%A3%85%E6%9D%BF/m-p/497446#M80137 <HTML><HEAD></HEAD><BODY><P>你好</P><P>我怀疑是mfgtool中uboot的问题，</P><P>但是怎么才能得到firmware下的u-boot-imx6dlsabresd_sd.imx？</P><P></P><P>在4.2.2的时候，可以在uboot下执行如下命令得到：</P><P>make distclean</P><P>make mx6dl_sabresd_mfg_config</P><P>make</P><P>但是现在不再适用了</P></BODY></HTML> Tue, 26 Jan 2016 08:45:37 GMT https://community.nxp.com/t5/i-MX-Processors/%E5%85%B3%E4%BA%8EAndroid5-1-1%E5%9C%A86DL%E4%B8%8A%E7%9A%84%E7%83%A7%E5%86%99-%E9%9D%9E%E5%8E%9F%E8%A3%85%E6%9D%BF/m-p/497446#M80137 jiangshao 2016-01-26T08:45:37Z Re: 关于Android5.1.1在6DL上的烧写（非原装板） https://community.nxp.com/t5/i-MX-Processors/%E5%85%B3%E4%BA%8EAndroid5-1-1%E5%9C%A86DL%E4%B8%8A%E7%9A%84%E7%83%A7%E5%86%99-%E9%9D%9E%E5%8E%9F%E8%A3%85%E6%9D%BF/m-p/497447#M80138 <HTML><HEAD></HEAD><BODY><P>Hi Jiang,</P><P>请问你这里使用的板子是参考我们官网开发板自己设计的么，哪里做了改动， DDR有做改动吗？你这里是直接使用官网的mfgtool，对于mfgtool使用的u-boot-imx6dlsabresd_sd.imx 你也是用官网提供的么？</P><P>还有一点你提到的需要在<SPAN style="color: #51626f; font-family: arial, helvetica, 'helvetica neue', verdana, sans-serif;">mfgtool2-android-mx6dl-sabresd-emmc.vbs中追加-ldo，我认为暂时没有必要这么做。</SPAN></P><P>Have a great day,</P><P>Dan</P><P></P><P>-----------------------------------------------------------------------------------------------------------------------<BR />Note: If this post answers your question, please click the Correct Answer button. Thank you!<BR />-----------------------------------------------------------------------------------------------------------------------</P></BODY></HTML> Tue, 26 Jan 2016 09:07:25 GMT https://community.nxp.com/t5/i-MX-Processors/%E5%85%B3%E4%BA%8EAndroid5-1-1%E5%9C%A86DL%E4%B8%8A%E7%9A%84%E7%83%A7%E5%86%99-%E9%9D%9E%E5%8E%9F%E8%A3%85%E6%9D%BF/m-p/497447#M80138 Rita_Wang 2016-01-26T09:07:25Z Re: 关于Android5.1.1在6DL上的烧写（非原装板） https://community.nxp.com/t5/i-MX-Processors/%E5%85%B3%E4%BA%8EAndroid5-1-1%E5%9C%A86DL%E4%B8%8A%E7%9A%84%E7%83%A7%E5%86%99-%E9%9D%9E%E5%8E%9F%E8%A3%85%E6%9D%BF/m-p/497448#M80139 <HTML><HEAD></HEAD><BODY><P>1、我们的板子是参照sabresd设计的，在Android 4.2和4.3的时候可以直接烧写sabresd的官版image</P><P>2、但是我们的硬件设计比较早，所以把PMIC给省了，直接DC/DC驱动，因此涉及到PMIC的程序都会有错，经过我们测试，在android 5.0版本上，devices tree参考sabresd 的sabresd-ldo.dts可以跑通，没有问题。</P><P>3、现在在测试5.1,5.1的u-boot一跑起来就会测试pmic，报错停止，没法进行下一步工作。我们想修改u-boot适应我们的板子。但是找不到编译mfgtools固件使用的u-boot的相关说明，请您提供帮助。</P></BODY></HTML> Tue, 26 Jan 2016 09:31:35 GMT https://community.nxp.com/t5/i-MX-Processors/%E5%85%B3%E4%BA%8EAndroid5-1-1%E5%9C%A86DL%E4%B8%8A%E7%9A%84%E7%83%A7%E5%86%99-%E9%9D%9E%E5%8E%9F%E8%A3%85%E6%9D%BF/m-p/497448#M80139 jiangshao 2016-01-26T09:31:35Z Re: 关于Android5.1.1在6DL上的烧写（非原装板） https://community.nxp.com/t5/i-MX-Processors/%E5%85%B3%E4%BA%8EAndroid5-1-1%E5%9C%A86DL%E4%B8%8A%E7%9A%84%E7%83%A7%E5%86%99-%E9%9D%9E%E5%8E%9F%E8%A3%85%E6%9D%BF/m-p/497449#M80140 <HTML><HEAD></HEAD><BODY><P>Hi Jiang,</P><P>你这里使用的板子是你自己设计的，你5需要根据你的板子来移植BSP，编译好的代码在你自己的板子上跑，不能直接使用官网的Demo。android5.1使用的内核版本和原来的都不一样。所以建议你参考现有的代码做该版本BSP的移植。关于mfgtool你可以参考一下我们论坛中的帖子：</P><P><A href="https://community.nxp.com/docs/DOC-328564">How to add new vbs for a new imx board in MFGTOOL</A></P><P><BR />Have a great day,<BR />(Dan)</P><P></P><P>-----------------------------------------------------------------------------------------------------------------------<BR />Note: If this post answers your question, please click the Correct Answer button. Thank you!<BR />-----------------------------------------------------------------------------------------------------------------------</P></BODY></HTML> Wed, 27 Jan 2016 09:03:41 GMT https://community.nxp.com/t5/i-MX-Processors/%E5%85%B3%E4%BA%8EAndroid5-1-1%E5%9C%A86DL%E4%B8%8A%E7%9A%84%E7%83%A7%E5%86%99-%E9%9D%9E%E5%8E%9F%E8%A3%85%E6%9D%BF/m-p/497449#M80140 Rita_Wang 2016-01-27T09:03:41Z Re: 关于Android5.1.1在6DL上的烧写（非原装板） https://community.nxp.com/t5/i-MX-Processors/%E5%85%B3%E4%BA%8EAndroid5-1-1%E5%9C%A86DL%E4%B8%8A%E7%9A%84%E7%83%A7%E5%86%99-%E9%9D%9E%E5%8E%9F%E8%A3%85%E6%9D%BF/m-p/497450#M80141 <HTML><HEAD></HEAD><BODY><P>Hi Dan,</P><P>    你好，我也有相关问题，我新建了帖子，请帮我看一下，非常感谢。</P><P>帖子：<A href="https://community.nxp.com/message/616505">It's failed to download Android5.1.1 on MCIMX6Q-SDB</A> </P><H1></H1></BODY></HTML> Fri, 19 Feb 2016 09:14:14 GMT https://community.nxp.com/t5/i-MX-Processors/%E5%85%B3%E4%BA%8EAndroid5-1-1%E5%9C%A86DL%E4%B8%8A%E7%9A%84%E7%83%A7%E5%86%99-%E9%9D%9E%E5%8E%9F%E8%A3%85%E6%9D%BF/m-p/497450#M80141 rayhe 2016-02-19T09:14:14Z Re: 关于Android5.1.1在6DL上的烧写（非原装板） https://community.nxp.com/t5/i-MX-Processors/%E5%85%B3%E4%BA%8EAndroid5-1-1%E5%9C%A86DL%E4%B8%8A%E7%9A%84%E7%83%A7%E5%86%99-%E9%9D%9E%E5%8E%9F%E8%A3%85%E6%9D%BF/m-p/497451#M80142 <HTML><HEAD></HEAD><BODY><P>你好，我现在也出现了和你一样的问题，板子上没有PMIC，所以也得修改MFG中uboot固件，能否告知下你制作uboot固件的方法呢？</P></BODY></HTML> Wed, 18 May 2016 03:50:24 GMT https://community.nxp.com/t5/i-MX-Processors/%E5%85%B3%E4%BA%8EAndroid5-1-1%E5%9C%A86DL%E4%B8%8A%E7%9A%84%E7%83%A7%E5%86%99-%E9%9D%9E%E5%8E%9F%E8%A3%85%E6%9D%BF/m-p/497451#M80142 void_ 2016-05-18T03:50:24Z Re: 关于Android5.1.1在6DL上的烧写（非原装板） https://community.nxp.com/t5/i-MX-Processors/%E5%85%B3%E4%BA%8EAndroid5-1-1%E5%9C%A86DL%E4%B8%8A%E7%9A%84%E7%83%A7%E5%86%99-%E9%9D%9E%E5%8E%9F%E8%A3%85%E6%9D%BF/m-p/497452#M80143 <HTML><HEAD></HEAD><BODY><P>Hi HongBo L,</P><P>Which board and BSP are you using?</P><P>Have a nice day</P><P>Dan</P></BODY></HTML> Wed, 18 May 2016 06:38:27 GMT https://community.nxp.com/t5/i-MX-Processors/%E5%85%B3%E4%BA%8EAndroid5-1-1%E5%9C%A86DL%E4%B8%8A%E7%9A%84%E7%83%A7%E5%86%99-%E9%9D%9E%E5%8E%9F%E8%A3%85%E6%9D%BF/m-p/497452#M80143 Rita_Wang 2016-05-18T06:38:27Z Re: 关于Android5.1.1在6DL上的烧写（非原装板） https://community.nxp.com/t5/i-MX-Processors/%E5%85%B3%E4%BA%8EAndroid5-1-1%E5%9C%A86DL%E4%B8%8A%E7%9A%84%E7%83%A7%E5%86%99-%E9%9D%9E%E5%8E%9F%E8%A3%85%E6%9D%BF/m-p/497453#M80144 <HTML><HEAD></HEAD><BODY><P>和提问者是一样的自己根据sabresd-sd做的，没有PMIC，烧写是烧写到emmc中。</P><P>以前用的是Android4.4.2，现在升级成Android5.1，结果源码编译过了确难在了程序下载上，我想知道的是如何制作自己修改的MFG中uboot固件，这样就可以修改源码规避这个问题</P></BODY></HTML> Wed, 18 May 2016 06:48:23 GMT https://community.nxp.com/t5/i-MX-Processors/%E5%85%B3%E4%BA%8EAndroid5-1-1%E5%9C%A86DL%E4%B8%8A%E7%9A%84%E7%83%A7%E5%86%99-%E9%9D%9E%E5%8E%9F%E8%A3%85%E6%9D%BF/m-p/497453#M80144 void_ 2016-05-18T06:48:23Z