topic Re: Getting raw10 data in ov5640 in i.MX Processors https://community.nxp.com/t5/i-MX-Processors/Getting-raw10-data-in-ov5640/m-p/497100#M80049 <HTML><HEAD></HEAD><BODY><P>it seems you&nbsp; set failed, I send the link to you for reference</P><P>&lt;<A _jive_internal="true" href="https://community.nxp.com/thread/307065#332645" title="https://community.freescale.com/thread/307065#332645">https://community.freescale.com/thread/307065#332645</A> &gt;.</P></BODY></HTML> Wed, 23 Mar 2016 08:22:59 GMT joanxie 2016-03-23T08:22:59Z Getting raw10 data in ov5640 https://community.nxp.com/t5/i-MX-Processors/Getting-raw10-data-in-ov5640/m-p/497099#M80048 <HTML><HEAD></HEAD><BODY><P><BR />hi friends,</P><P></P><P>i am using omnivision ov5640 sensor with humming board edge.</P><P></P><P>I need sensor output as raw10 bit. i set sensor for raw10 ( 0x3034 = 1A, 0x501f = 0x04, 0x4300 = 0x00).</P><P>I am able to obtain some data in buffer, but its not proper. </P><P></P><P>i also got an error message as "mipi csi2 cannot receive data correctly!" . </P><P></P><P>looking forward to your suggestions.</P><P></P><P>Arun</P></BODY></HTML> Tue, 22 Mar 2016 15:56:51 GMT https://community.nxp.com/t5/i-MX-Processors/Getting-raw10-data-in-ov5640/m-p/497099#M80048 aruncyriac 2016-03-22T15:56:51Z Re: Getting raw10 data in ov5640 https://community.nxp.com/t5/i-MX-Processors/Getting-raw10-data-in-ov5640/m-p/497100#M80049 <HTML><HEAD></HEAD><BODY><P>it seems you&nbsp; set failed, I send the link to you for reference</P><P>&lt;<A _jive_internal="true" href="https://community.nxp.com/thread/307065#332645" title="https://community.freescale.com/thread/307065#332645">https://community.freescale.com/thread/307065#332645</A> &gt;.</P></BODY></HTML> Wed, 23 Mar 2016 08:22:59 GMT https://community.nxp.com/t5/i-MX-Processors/Getting-raw10-data-in-ov5640/m-p/497100#M80049 joanxie 2016-03-23T08:22:59Z