i.MX ProcessorsのトピックRe: How to update Warpboard's u-boot

How to update Warpboard's u-boot

weifuchang — Fri, 08 Apr 2016 07:33:39 GMT

I want to update the u-boot of warpboard, and used imx_usb tool to load new u-boot into memory, but it will use default u-boot after reboot.

Can I save the u-boot in warpboard by any command?

Re: How to update Warpboard's u-boot

Rita_Wang — Fri, 29 Apr 2016 08:28:13 GMT

Hi Weifu,

When the u-boot boot up you can change and set the parameters in the command line.
Have a great day,
Dan

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Mark Correct button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: How to update Warpboard's u-boot

weifuchang — Fri, 29 Apr 2016 08:44:59 GMT

Hi Dan

How to flash the new u-boot image to warpboard?

Thanks

Wei-Fu Chang

Re: How to update Warpboard's u-boot

Rita_Wang — Fri, 29 Apr 2016 08:56:56 GMT

Hi Wei-Fu Chang,

You can use mfgtool to write the u-boot image to your board.

Best Regards

Dan

Re: How to update Warpboard's u-boot

weifuchang — Fri, 06 May 2016 05:36:46 GMT

Hi Dan

Could you teach me how to use mfgtool to write warpboard step by step?

Thanks a lot

Wei-Fu Chang