i.MX Processors中的主题 imx6 touchscreen

imx6 touchscreen

小辉哥 — Thu, 25 Feb 2016 05:19:03 GMT

hi，

i am using imx6ul board，I found a very large touch jitter，How can I improve it？my VDDA_ADC_3P3 is connected to DCDC_3V3

Jitter has to do with this？

Re: imx6 touchscreen

art — Fri, 26 Feb 2016 07:45:30 GMT

Do you use the i.MX6UL on-chip analog touchscreen interface? If so, the answer is: yes, supplying the ADC VDDA_ADC_3P3 supply voltage from a switching DCDC converter (DCDC_3V3) may cause high amount of ADC unstability. To avoid it, follow the original i.MX6UL EVK board connection, where VDDA_ADC_3P3 is supplied form LDO (not switching DCDC converter) produced VLDO_3V3 voltage.

Another point is that for proper ADC operation you have to configure the used ADC input pads (GPIO1_IO00 to GPIO1_IO04) IOMUX as GPIO inputs with pull/keepers disabled.

Have a great day,
Artur

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: imx6 touchscreen

小辉哥 — Mon, 29 Feb 2016 07:28:06 GMT

thanks very much！

1，yes i used the i.MX6UL on-chip analog touchscreen interface，ichange the VDDA_ADC_3P3 to LDO，but not very much improved，I found that the larger the screen the more powerful shake。

2，the ADC GPIO configuration as follows：（reference the imx6ul-14x14-evk）