imx6qdl-sabresd.dtsi syntax error issue

veeranjaneyulug — Wed, 16 Mar 2016 14:55:19 GMT

HI every one,

in imx6qdl-sabresd.dtsi file i need to change some code in place of volume up and volume down.I gave pir sensor and ntc sensor .But its giving synatx error .

pir {

label = "pir sensor";

gpios = <&gpio1 4 1>;

gpio-key,wakeup;

linux,code = <KEY_PIRSENSOR >; //synatx error showing

};

ntc {

label = "Ntc sensor";

gpios = <&gpio1 5 1>;

gpio-key,wakeup;

linux,code = <KEY_NTCSENSOR>; //synatx error showing

};

pir {

label = "pir sensor";

gpios = <&gpio1 4 1>;

gpio-key,wakeup;

linux,code = <KEY_VOLUMEUP >; //pir sensor for customboard

};

ntc {

label = "Ntc sensor";

gpios = <&gpio1 5 1>;

gpio-key,wakeup;

linux,code = <KEY_VOLUMEDOWN>; //ntc sensor for customboard

};

If i gave pir and ntc inplace of volumeup and volumedown keys .Its building .But i gave reverse its not building showing syntax error .

Re: imx6qdl-sabresd.dtsi syntax error issue

alejandrolozan1 — Fri, 18 Mar 2016 00:36:22 GMT

Hi,

Have you checked that the KEY_PIRSENSOR and KEY_NTCSENSOR symbols are defined in a header file?

If not, it is expected to get a sintax error.

KEY_VOLUMEDOWN for example is defined in arch/arm/boot/dts/include/dt-bindings/input/input.h

Best Regards,

Alejandro

i.MX ProcessorsのトピックRe: imx6qdl-sabresd.dtsi syntax error issue

imx6qdl-sabresd.dtsi syntax error issue

Re: imx6qdl-sabresd.dtsi syntax error issue