topic Re: How to build the MFGtool in i.MX Processors https://community.nxp.com/t5/i-MX-Processors/How-to-build-the-MFGtool/m-p/472609#M74804 <HTML><HEAD></HEAD><BODY><P>Hi xj</P><P></P><P>general steps would be rebuild project for MFGTool firmware</P><P>like xx-UUT.sln", please check sources in</P><P>iMX35-3DS-PDK1_7/SRC/DRIVERS/UUT/bspuut.cpp (bsp related uce commands)</P><P>COMMON_FSL_V2_PDK1_7/UUT/uce.cpp</P><P>also check attached WinCE Guide, pay attention to sect.2.3 Sample OS Design Solutions</P><P></P><P>Best regards</P><P>igor</P><P>-----------------------------------------------------------------------------------------------------------------------</P><P>Note: If this post answers your question, please click the Correct Answer button. Thank you!</P><P>-----------------------------------------------------------------------------------------------------------------------</P></BODY></HTML> Mon, 16 May 2016 11:18:42 GMT igorpadykov 2016-05-16T11:18:42Z How to build the MFGtool https://community.nxp.com/t5/i-MX-Processors/How-to-build-the-MFGtool/m-p/472608#M74803 <HTML><HEAD></HEAD><BODY><P><BR />Hi Guys,</P><P>I try to build the MFG tool firware for WINCE 6&nbsp; based on i.MX35, and the media type is CFI NOR Flash, the version of MFGTool is mfgtool.v1.6.2.055. But <SPAN style="color: #51626f; font-family: arial, helvetica, 'helvetica neue', verdana, sans-serif;">I didn't find the configuration for MFG Tool.</SPAN></P></BODY></HTML> Mon, 16 May 2016 09:15:02 GMT https://community.nxp.com/t5/i-MX-Processors/How-to-build-the-MFGtool/m-p/472608#M74803 xjli 2016-05-16T09:15:02Z Re: How to build the MFGtool https://community.nxp.com/t5/i-MX-Processors/How-to-build-the-MFGtool/m-p/472609#M74804 <HTML><HEAD></HEAD><BODY><P>Hi xj</P><P></P><P>general steps would be rebuild project for MFGTool firmware</P><P>like xx-UUT.sln", please check sources in</P><P>iMX35-3DS-PDK1_7/SRC/DRIVERS/UUT/bspuut.cpp (bsp related uce commands)</P><P>COMMON_FSL_V2_PDK1_7/UUT/uce.cpp</P><P>also check attached WinCE Guide, pay attention to sect.2.3 Sample OS Design Solutions</P><P></P><P>Best regards</P><P>igor</P><P>-----------------------------------------------------------------------------------------------------------------------</P><P>Note: If this post answers your question, please click the Correct Answer button. Thank you!</P><P>-----------------------------------------------------------------------------------------------------------------------</P></BODY></HTML> Mon, 16 May 2016 11:18:42 GMT https://community.nxp.com/t5/i-MX-Processors/How-to-build-the-MFGtool/m-p/472609#M74804 igorpadykov 2016-05-16T11:18:42Z