i.MX ProcessorsのトピックRe: Android Prebuilt image for sabreauto board

Android Prebuilt image for sabreauto board

sachusanal — Mon, 07 Dec 2015 11:53:40 GMT

Dear Sir ,

Could you please give me prebuilt android lolipop image for sabreauto board.

and MFGTool for flashing it to sabreauto evaluation kit

please help me

Regards

Sachu

Re: Android Prebuilt image for sabreauto board

igorpadykov — Tue, 08 Dec 2015 06:24:47 GMT

Hi Sachu

please use mfg tools script mfgtool2-android-mx6q-sabreauto-sdcard.vbs

and images:

Board Support Packages (27)

IMX6-L500-100-ANDROID-DEMO-SD-BSP (REV L5.0.0_1.0.0)

i.MX 6Quad, i.MX 6Dual, i.MX 6DualLite, and i.MX 6Solo Android L5.0.0_1.0.0 BSP

IMX6-L500-100-ANDROID-DEMO-iMX6SX-BSP (REV L5.0.0_1.0.0)

i.MX 6SoloX Android L5.0.0_1.0.0 BSP Binary Demo Files.

Programmers (Flash, etc.) (7)

IMX-L5.0.0-MFG-TOOL (REV L5.0.0_1.0.0)

i.MX 6Family Manufacturing Toolkit for L5.0.0_1.0.0

http://www.nxp.com/products/microcontrollers-and-processors/arm-processors/i.mx-applications-processors-based-on-arm-cores/i.mx-6-processors/i.mx6qp/sabre-board-for-smart-devices-reference-design-based-on-the-i.mx-6-series:RDIMX6SABREBRD?fpsp=1&tab=Design_Tools_Tab

Best regards

igor

-----------------------------------------------------------------------------------------------------------------------

Note: If this post answers your question, please click the Correct Answer button. Thank you!

-----------------------------------------------------------------------------------------------------------------------

Re: Android Prebuilt image for sabreauto board

sachusanal — Wed, 09 Dec 2015 06:27:50 GMT

Dear Igor,

Thanks for your response.But I couldn't find out the IMX6-L500-100-ANDROID-DEMO-SD-BSP (REV L5.0.0_1.0.0) could you please give me the exact link.

Re: Android Prebuilt image for sabreauto board

igorpadykov — Wed, 09 Dec 2015 06:45:19 GMT

IMX6-L500-100-ANDROID-DEMO-SD-BSP

Re: Android Prebuilt image for sabreauto board

sachusanal — Fri, 11 Dec 2015 06:17:09 GMT

hai Igor ,

I downloaded android demo-SD-BSP from the above site. and MFG tool from the(android_L5.0.0_1.0.0-ga_tools ) NXP site.

I extracted the android_L5.0.0_1.0.0-ga_full_image_6qsabreauto image and put the images as per the android user guide steps.

I Copied following files from either release_package/android_L5.0.0_1.0.0-ga_core_image_6qsabreauto.tar.gz or

release_package/android_L5.0.0_1.0.0-ga_full_image_6qsabreauto.tar.gz to the MFGTool-Dir/Profiles/Linux/OS

Firmware/files/android/sabreauto path.

• u-boot-imx6q.imx

• SD/boot-imx6q.img

• SD/system.img

• SD/recovery.img

Change SABRE-AI S3 (boot mode) to 0101 (from 1-4 bit) to enter download mode.

Power on the board. Using USB cable on the SABRE-AI OTG port, connect a computer running Windows OS to the SABRE-AI board.

flashing by using this vb file mfgtool2-android-mx6q-sabreauto-nand.vbs .

but i get an error like this . please help me to solve this issue.

Re: Android Prebuilt image for sabreauto board

igorpadykov — Fri, 11 Dec 2015 08:41:01 GMT

Hi Sachu

had you installed NAND to socket, NAND FLASH is not included with shipped boards.

Best regards

igor

Re: Android Prebuilt image for sabreauto board

sachusanal — Fri, 11 Dec 2015 09:00:38 GMT

Dear Igor ,

I am not installing NAND on the Socket. is it possible to install Sd card on the SD socket and flash mfgtool2-android-mx6q-sabreauto-sdcard.vbs script file.

Re: Android Prebuilt image for sabreauto board

igorpadykov — Fri, 11 Dec 2015 09:02:55 GMT

Hi Sachu

yes, possible.

Best regards

igor