topic Re: Custom board MFG tool support in i.MX Processors

Custom board MFG tool support

vijaikumar — Sun, 23 Aug 2015 11:40:52 GMT

Hi All,

We are trying to add support for MFG tool in our board. But MFGtool hangs on loading our custom uboot. It is stuck at loading uboot. How can it be resolved?

Re: Custom board MFG tool support

igorpadykov — Mon, 24 Aug 2015 02:30:46 GMT

Hi Vijai

Mfg toos firmware should be rebuilt with new ddr settings for custom board

(located in uboot dcd header), they can be found from DDR test results

https://community.freescale.com/docs/DOC-96412

Best regards

igor

-----------------------------------------------------------------------------------------------------------------------

Note: If this post answers your question, please click the Correct Answer button. Thank you!

-----------------------------------------------------------------------------------------------------------------------

Re: Custom board MFG tool support

vijaikumar — Sat, 29 Aug 2015 08:45:13 GMT

Hi igorpadykov,

I have built custom firmware (uboot kernel and initramfs). But when trying to load it with MFG Tool it hangs at "Loading uBoot". It successfully loads the SABRESD uboot but not mine.

Re: Custom board MFG tool support

igorpadykov — Sun, 30 Aug 2015 01:12:31 GMT

Hi Vijai

could you provide full log ? You can try to rename custom uboot to name

which is used by "SABRESD uboot" (which loads succesfully, as you mentioned)

Best regards

igor