i.MX ProcessorsのトピックRe: demo image

demo image

sachusanal — Fri, 03 Jul 2015 05:35:01 GMT

Hai Sir ,

Could you please give me the Demo image (prebuit imag ) for Mx6qsabresd board (evaluation kit).

Re: demo image

Yuri — Fri, 03 Jul 2015 06:29:22 GMT

You may find demo images (.sdcard fime extention), such as "fsl-image-qt5-x11-imx6qdlsolo.sdcard"

for the recent BSP (L3.14.28) in the following bundle

http://www.freescale.com/webapp/Download?colCode=L3.14.28_1.0.0_iMX6QDLS_BUNDLE

Please use the next Linux command to deploy it to SD card :

$ sudo dd if= fsl-image-qt5-x11-imx6qdlsolo.sdcard of=/dev/sdb1 bs=1M

Summary page :

http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=IMX6_SW

Have a great day,
Yuri

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: demo image

sachusanal — Fri, 03 Jul 2015 07:21:06 GMT

Hai yuri,

Thanks for your response.

is it needed to create partision.

could u please give me the stepd for creating partision . and also let me know is it needed to create filesystem for ext3/ext4?

Re: demo image

sachusanal — Fri, 03 Jul 2015 07:26:05 GMT

Hai yuri ,

let me know what boot arguments is using for loading

Re: demo image

sachusanal — Fri, 03 Jul 2015 08:34:41 GMT

could u please share me mx6q sabresd board .sd card image.

in this download only contain imx6soloboard image

please reply its urgent one

Re: demo image

Yuri — Mon, 06 Jul 2015 02:38:45 GMT

The image file contains all the needed parts - it is main advantage of the image - just copy it

to sd card.

Regards,

Yuri.

Re: demo image

Yuri — Mon, 06 Jul 2015 02:48:50 GMT

Please use

\L3.14.28_1.0.0_ga_images_MX6.tar\L3.14.28_1.0.0_ga_images_MX6\fsl-image-gui-x11-imx6qdlsolo.sdcard

in the mentioned package.

Regards,

Yuri.

Re: demo image

Yuri — Mon, 06 Jul 2015 02:51:23 GMT

U-boot kernel arguments may be found in section 4 (Kernel Boot Parameters)

of "i.MX_Linux_Release_Notes.pdf"

Regards,

Yuri.

Re: demo image

sachusanal — Mon, 06 Jul 2015 03:46:08 GMT

Hai yuri ,

I created sdb1 partition on Sd card. because at the starting sd card have no partition .

then i copied that solo image to sd card. but it is not working the imx6Qsabresd evaluation kit.

please reply me.

it's urgent one

Re: demo image

ruihongfeng-b36 — Mon, 06 Jul 2015 03:51:39 GMT

test

Re: demo image

sachusanal — Mon, 06 Jul 2015 05:06:51 GMT

Hai Ruihong ,

I have tested with these two images in mx6qsabresd evaluation kit which purchased from freescale ( fsl-image-qt5-x11-imx6qdlsolo.sdcard ,fsl-image-gui-x11-imx6qdlsolo.sdcard) both the images are not booting imx6qsabresd board evaluation kit.

could u please help me to solve this issue

could u please give me the exact image for imx6qsabrsd board

Re: demo image

Yuri — Mon, 06 Jul 2015 07:28:21 GMT

Have You used the Linux host to deploy the image with the following command ?

$ sudo dd if= fsl-image-qt5-x11-imx6qdlsolo.sdcard of=/dev/sdb1 bs=1M

After that insert the SD card to the board and power on ?

Are Your boot configuration correct ? Please check it - SD3 boot.

Regards,

Yuri.

Re: demo image

sachusanal — Mon, 06 Jul 2015 08:16:56 GMT

Hai Yuri ,

I copied the image by using this command sudo dd if= fsl-image-qt5-x11-imx6qdlsolo.sdcard of=/dev/sdb1 bs=1M

after that the SD card is put in board. i didnt passs any boot arguemts the boot loader log is also not shown in teraterm

my Evaluation kit is MCIMX6Q-SDP

please help me

its an urgent issue

Re: demo image

ruihongfeng-b36 — Mon, 06 Jul 2015 08:26:44 GMT

Hi Yuri,

I did some test and tried if I can post on community.

Please ignore or reject my content.

Annie

Re: demo image

Yuri — Mon, 06 Jul 2015 09:41:15 GMT

What is Your boot configuration (SW6) ?

Regards,

Yuri.

Re: demo image

sachusanal — Mon, 06 Jul 2015 09:46:17 GMT

Re: demo image

sachusanal — Mon, 06 Jul 2015 10:11:53 GMT

hai yuri ,

I copied the image by using sudo dd if= fsl-image-qt5-x11-imx6qdlsolo.sdcard of=/dev/sdb1 bs=1M this command.

but it is not loading ,uboot also not loading ...

please help me

Re: demo image

Yuri — Mon, 06 Jul 2015 10:15:16 GMT

Is Your board working ?
Can You use MFG with the board ?

Regards,

Yuri.

Re: demo image

sachusanal — Mon, 06 Jul 2015 10:19:34 GMT

my board is working.

Now i download android prebuilt image by using MFG tool. this is working properly in my board

could u please help me to flash the image by using mfg tool give me the mfgtool image ,mfgtool for downloading the prebuilt image to my board

Re: demo image

Yuri — Mon, 06 Jul 2015 10:30:29 GMT

Just tried "fsl-image-gui-x11-imx6qdlsolo.sdcard" from the Web - it is working

on my board.

Regards,

Yuri.