i.MX ProcessorsのトピックRe: MIPI interface on iMX6

MIPI interface on iMX6

gsr — Tue, 28 Apr 2015 08:05:53 GMT

Hi,

I am designing a product with iMX6 solo and have a question about MIPI interface. Does anybody have any experience of the maximum length of FPC(flexi cable)of camera that could work with MIPI interface on iMX6?

Our current form factor of the product requires FPC equivalent to 24cm.If my design matches impedance of transmission lines well, would that work?

Any help would be highly appreciated.

Thanks,

GSR

Re: MIPI interface on iMX6

igorpadykov — Wed, 29 Apr 2015 02:47:20 GMT

Hi Gul

this may depend on data rate and strictly speaking, require simulations.

One can refer below for some estimations

http://www.emc.polito.it/SPI07/Presentations/May_tue_15/Session_8_PM/PresentationSPI.pdf

http://www.ti.com/lit/ml/snla187/snla187.pdf

Best regards

igor

-----------------------------------------------------------------------------------------------------------------------

Note: If this post answers your question, please click the Correct Answer button. Thank you!

-----------------------------------------------------------------------------------------------------------------------

Re: MIPI interface on iMX6

gsr — Fri, 01 May 2015 13:27:10 GMT

HI igor,

Thanks for useful information. I will try to simulate and see how it goes?

Regards,

Gul