i.MX ProcessorsのトピックRe: mx6sl Custom Board. boot device configuration.

mx6sl Custom Board. boot device configuration.

changyonglee — Fri, 24 Jul 2015 05:26:05 GMT

Hi. All.

want to boot i.MX6SoloLite Custom Board From eMMC Interface, for that I need to configure the boot device selection.(BT_FUSE_SEL or eFUSE)

How can Configure the BT_FUSE_SEL value or eFUSE value. ?

ver : uboot-2009.08, linux-3.0.35

Regards,

igorpadykov — Fri, 24 Jul 2015 06:02:16 GMT

Hi changyong

please check sect.8.5.2.1 Expansion Device eFUSE Configuration

IMX6SLRM i.MX 6SoloLite Applications Processor Reference Manual

and Chapter 7 Avoiding Board Bring-up Problems

IMX6SLHDG Hardware Development Guide for i.MX 6SoloLite - User Guide

Best regards

igor

-----------------------------------------------------------------------------------------------------------------------

Note: If this post answers your question, please click the Correct Answer button. Thank you!

-----------------------------------------------------------------------------------------------------------------------

changyonglee — Fri, 24 Jul 2015 07:55:32 GMT

I want to know to write eFUSE on iMX6SL(BOOT_CFG)

Best regards.

igorpadykov — Fri, 24 Jul 2015 11:19:55 GMT

Hi changyong

please check

Q&A: How to program i.MX6 eFUSE?

~igor