topic Re: Search commandline transfer tool for iMx28 in i.MX Processors https://community.nxp.com/t5/i-MX-Processors/Search-commandline-transfer-tool-for-iMx28/m-p/431983#M65784 <HTML><HEAD></HEAD><BODY><P>HI Stefan</P><P></P><P>in general MFGtool2 was developed for i.MX6, however</P><P>preliminary mfgtools-rel_1.6.2.055 (<A href="https://community.nxp.com/thread/355524">Mfg tool for i.MX28 not support USB3.0</A> )</P><P>seems supports i.MX28. One can try it.</P><P></P><P>Best regards</P><P>igor</P><P>-----------------------------------------------------------------------------------------------------------------------</P><P>Note: If this post answers your question, please click the Correct Answer button. Thank you!</P><P>-----------------------------------------------------------------------------------------------------------------------</P></BODY></HTML> Tue, 06 Oct 2015 01:36:50 GMT igorpadykov 2015-10-06T01:36:50Z Search commandline transfer tool for iMx28 https://community.nxp.com/t5/i-MX-Processors/Search-commandline-transfer-tool-for-iMx28/m-p/431982#M65783 <HTML><HEAD></HEAD><BODY><P>I use the MfGTool 1.6 to transfer the Windows CE-Image inkl. the eboot to the embedded module during the development.</P><P></P><P>Now I search a commandline tool for the series production, but I did not find anyone.</P><P>I found only the "sb_loader.exe", but I cannot transfer the eboot.</P><P></P><P>Is there a tool for the iMx28 like the MFGtool2?</P></BODY></HTML> Mon, 05 Oct 2015 08:38:47 GMT https://community.nxp.com/t5/i-MX-Processors/Search-commandline-transfer-tool-for-iMx28/m-p/431982#M65783 fehrlest 2015-10-05T08:38:47Z Re: Search commandline transfer tool for iMx28 https://community.nxp.com/t5/i-MX-Processors/Search-commandline-transfer-tool-for-iMx28/m-p/431983#M65784 <HTML><HEAD></HEAD><BODY><P>HI Stefan</P><P></P><P>in general MFGtool2 was developed for i.MX6, however</P><P>preliminary mfgtools-rel_1.6.2.055 (<A href="https://community.nxp.com/thread/355524">Mfg tool for i.MX28 not support USB3.0</A> )</P><P>seems supports i.MX28. One can try it.</P><P></P><P>Best regards</P><P>igor</P><P>-----------------------------------------------------------------------------------------------------------------------</P><P>Note: If this post answers your question, please click the Correct Answer button. Thank you!</P><P>-----------------------------------------------------------------------------------------------------------------------</P></BODY></HTML> Tue, 06 Oct 2015 01:36:50 GMT https://community.nxp.com/t5/i-MX-Processors/Search-commandline-transfer-tool-for-iMx28/m-p/431983#M65784 igorpadykov 2015-10-06T01:36:50Z