i.MX ProcessorsのトピックRe: Nand GPMI definitions https://community.nxp.com/t5/i-MX-Processors/Nand-GPMI-definitions/m-p/175384#M6486 <HTML><HEAD></HEAD><BODY><P>Thanks alot,</P><P>Shany</P></BODY></HTML> Tue, 24 Jul 2012 08:11:53 GMT shany 2012-07-24T08:11:53Z Nand GPMI definitions https://community.nxp.com/t5/i-MX-Processors/Nand-GPMI-definitions/m-p/175382#M6484 <HTML><HEAD></HEAD><BODY><P>Hello,</P><P>I'm trying to adjust nand settings in iMX28 with wince6 bsp.</P><P>When runnig in Nand boot mode - I am recieving the following error - "no NAND type matched!".</P><P>My question is this - do I have to configure the GPMI ports to be NAND ports?&nbsp;</P><P>If&nbsp;no - where&nbsp;does this configuration take place?</P><P>thanks,</P><P>Shany&nbsp;</P></BODY></HTML> Mon, 16 Jul 2012 08:22:50 GMT https://community.nxp.com/t5/i-MX-Processors/Nand-GPMI-definitions/m-p/175382#M6484 shany 2012-07-16T08:22:50Z Re: Nand GPMI definitions https://community.nxp.com/t5/i-MX-Processors/Nand-GPMI-definitions/m-p/175383#M6485 <HTML><HEAD></HEAD><BODY><P>There is an example for how to add a new NAND support in WinCE 6 BSP.</P><P><A href="http://imxcommunity.org/profiles/blogs/how-to-add-a-new-nand-flash-support-in-imx-wince-bsp">http://imxcommunity.org/profiles/blogs/how-to-add-a-new-nand-flash-support-in-imx-wince-bsp</A></P></BODY></HTML> Fri, 20 Jul 2012 08:40:59 GMT https://community.nxp.com/t5/i-MX-Processors/Nand-GPMI-definitions/m-p/175383#M6485 qiang_li-mpu_se 2012-07-20T08:40:59Z Re: Nand GPMI definitions https://community.nxp.com/t5/i-MX-Processors/Nand-GPMI-definitions/m-p/175384#M6486 <HTML><HEAD></HEAD><BODY><P>Thanks alot,</P><P>Shany</P></BODY></HTML> Tue, 24 Jul 2012 08:11:53 GMT https://community.nxp.com/t5/i-MX-Processors/Nand-GPMI-definitions/m-p/175384#M6486 shany 2012-07-24T08:11:53Z