topic MX28 Secure Boot for Wince system in i.MX Processors

MX28 Secure Boot for Wince system

garylijs — Fri, 08 May 2015 04:19:13 GMT

Hi freescale engineers,

I want to prepare MX28 secure boot for Wince system, I don't find any introduction for Wince.

Someone ever said it's the same as linux, I have tried follow those doc to make secure boot for wince.NOW I don't know how to prepare my "Program Image".

According to this website:Mx28 Secure Boot .Follow steps I have done:

1. HAB4 keys and certificates

2. HAB4 SRK tables and efuse Hash

3 Set OPT bits

OPT key

SRK table hash

bit_setting.txt (This TXT file download from freescale wetsite:Mx28 Secure Boot )

4. Program image (wince: xldr, eboot, nk)

Thanks all,

Best Regards,

Gary

Re: MX28 Secure Boot for Wince system

garylijs — Thu, 14 May 2015 04:19:33 GMT

Following the instruction of secure boot for linux system.Currently,I was successfully able to use HAB and Code Sign Tool to sign and validate the signature of the Eboot.

Re: MX28 Secure Boot for Wince system

Yuri — Tue, 19 May 2015 21:16:58 GMT

You may encrypt the whole WinCE image (nk.nb0) using approach, described

in section 5 (Encrypted boot and Elftosb) of the app note AN4555.

Best regards

Yuri

-----------------------------------------------------------------------------------------------------------------------

Note: If this post answers your question, please click the Correct Answer button. Thank you!

-----------------------------------------------------------------------------------------------------------------------

Re: MX28 Secure Boot for Wince system

collinshi — Thu, 11 Aug 2016 02:07:29 GMT

hi Yuri,

Does it need some permit to access the Mx28 Secure Boot ?

It always tell me "Unauthorized" when I open this page.

Re: MX28 Secure Boot for Wince system

Yuri — Thu, 11 Aug 2016 05:40:51 GMT

Hello,

yes, this is internal link.

Please create request to get it.

"How to submit a new question for NXP Support"

< https://community.freescale.com/docs/DOC-329745 >

Regards,

Yuri.

Re: MX28 Secure Boot for Wince system

collinshi — Thu, 11 Aug 2016 15:31:43 GMT

Hello,

Thanks. I get the the Mx28 Secure Boot document.

in this document, it has a step to tell how to sign the uimage.

7. Sign uImage

we can create the IVT struct to set the *entry, *self and *csf pointer value for the uImage.

But for the power_prep and boot_prep ,there is a patch to add the ivt structure.

0001-enable-hab-in-imx-bootlets.patch is hab patch for
imx-bootlets. It add the ivt structure to power_prep and boot_prep, reserve
0x2000 bytes for csf data.

I am working on HAB for wince eboot.

For wince eboot,there is no patch to do so.

May I create the ivt struct of xldr & eboot by manually set the *entry, *self and *csf pointer value as the uImage example?

Is there any special limitation of the IVT ? For example , the IVT 's *self must be 0x8000 ? In the *.bd file, we can see they always load the ivt into 0x8000. Such as:

load ivt (entry = power_prep:_start) > 0x8000;